Chipsets before SM8450 have only one broadcast register (Broadcast_OR) which is used to broadcast writes and check for status bit 0 only in all channels. >From SM8450 onwards, a new Broadcast_AND region was added which checks for status bit 1. This hasn't been updated and Broadcast_OR region was wrongly being used to check for status bit 1 all along. Hence mapping Broadcast_AND region's address space to LLCC in SM8550. Signed-off-by: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm8550.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 3904348075f6..ee387e6f9832 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -4263,12 +4263,14 @@ system-cache-controller@25000000 { <0 0x25200000 0 0x200000>, <0 0x25400000 0 0x200000>, <0 0x25600000 0 0x200000>, - <0 0x25800000 0 0x200000>; + <0 0x25800000 0 0x200000>, + <0 0x25a00000 0 0x200000>; reg-names = "llcc0_base", "llcc1_base", "llcc2_base", "llcc3_base", - "llcc_broadcast_base"; + "llcc_broadcast_base", + "llcc_broadcast_and_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; }; -- 2.34.1