Re: [RFC] dt-bindings: firmware: arm,scmi: Add properties for i.MX95 Pinctrl OEM extensions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 16, 2024 at 03:30:12PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@xxxxxxx>
> 
> i.MX95 Pinctrl is managed by System Control Management Interface(SCMI)
> firmware using OEM extensions. No functions, no groups are provided by
> the firmware. So add i.MX95 specific properties.
> 
> To keep aligned with current i.MX pinctrl bindings, still use "fsl,pins"
> for i.MX95.
> 
> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> ---
> 
> V1:
>  There is already a v6 version for i.MX95 pinctrl with binding got reviewed by
>  Rob, https://lore.kernel.org/all/20240513-pinctrl-scmi-oem-v3-v6-1-904975c99cc4@xxxxxxx/
>  But after NXP internal discussion, to keep "fsl,pins" for i.MX95 would make
>  it aligned with current i.MX93/8M/7 bindings which people are familiar with,
>  and easy to understand.
> 
>  Sorry to bring back so late after your reviewing in previous generic binding
>  patch. This is not to reject the v6 patch, just wanna to see whether you are
>  happy with "fsl,pins" for i.MX95. If people are happy to accept, I will post
>  out driver together with this patch in new patchset to reject v6. If people are
>  not happy, we could continue with v6.

It is fine for me.

Rob




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux