Il 20/05/24 14:53, Julien Panis ha scritto:
On 4/23/24 11:22, AngeloGioacchino Del Regno wrote:
Il 02/04/24 05:25, Nicolas Pitre ha scritto:
This is a bunch of patches to support the MT8186 and MT8188 thermal
sensor configurations. Several changes are needed to cope with oddities
these SOCs implement.
All values (calibration data offsets, etc.) were lifted and adapted from
the vendor driver source code.
I picked patches 7 and 12 (and also fixed them) introducing the nodes for the
LVTS controllers, but will not pick 9 and 15, as they're either missing thermal
zones and/or using the wrong names; let's wait for the next cycle for those, as
I will also be able to add the SVS on top (needs a bit of time for testing),
getting both SoCs complete on the LVTS side, without rushing.
Cheers,
Angelo
Hello Angelo.
I took over Nico's work, so I might have missed a few things, but I'm
a little bit confused with patches 7 and 13 (you wrote '12' but meant
'13' I guess, didn't you ?).
It seems to me that patches 7 and 13 were applied in next-20240503
(f5bcf8ab0950 and d3dbc472ac66). But I don't find them any more in
next-20240520. It's likely that I don't understand well the process, but
I prefer being sure...Should I resend them in next series ?
Yes, please.
Just a comment about d3dbc472ac66. There's a typo error, I think:
nvmem-cell-names = "lvts-calib-data1";
...should be replaced with
nvmem-cell-names = "lvts-calib-data-1";
...according to the related yaml.
Yes, that was a typo :-)
Cheers,
Angelo
