Correct the clocks being used by the display clock controller on the
SC8180X platform (to match the schema):
- Drop the sleep clock
- Add DSI clocks
- Reorder eDP / DP clocks
This changes the order of clocks, however it should be noted that the
clock list was neither correct nor followed the schema beforehand.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc8180x.dtsi | 22 ++++++++++++++--------
1 file changed, 14 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 067712310560..b92b6fb73057 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -3308,21 +3308,27 @@ dispcc: clock-controller@af00000 {
compatible = "qcom,sc8180x-dispcc";
reg = <0 0x0af00000 0 0x20000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&sleep_clk>,
+ <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>,
<&usb_prim_dpphy 0>,
<&usb_prim_dpphy 1>,
- <&usb_sec_dpphy 0>,
- <&usb_sec_dpphy 1>,
<&edp_phy 0>,
- <&edp_phy 1>;
+ <&edp_phy 1>,
+ <&usb_sec_dpphy 0>,
+ <&usb_sec_dpphy 1>;
clock-names = "bi_tcxo",
- "sleep_clk",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dsi1_phy_pll_out_byteclk",
+ "dsi1_phy_pll_out_dsiclk",
"dp_phy_pll_link_clk",
"dp_phy_pll_vco_div_clk",
- "dptx1_phy_pll_link_clk",
- "dptx1_phy_pll_vco_div_clk",
"edp_phy_pll_link_clk",
- "edp_phy_pll_vco_div_clk";
+ "edp_phy_pll_vco_div_clk",
+ "dptx1_phy_pll_link_clk",
+ "dptx1_phy_pll_vco_div_clk";
power-domains = <&rpmhpd SC8180X_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
#clock-cells = <1>;
--
2.39.2
