Re: [PATCH 08/12] ARM: DT: apq8064: Add USB OTG support for CM QS-600

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 02/23/15 09:55, Srinivas Kandagatla wrote:
> From: Nicolas Dechesne <nicolas.dechesne@xxxxxxxxxx>
> 
> This patch adds USB OTG support on USB1 for Compulab QS-600 Board.
> 
> Signed-off-by: Nicolas Dechesne <nicolas.dechesne@xxxxxxxxxx>

Acked-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>

> ---
>  arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> index af2e075..6349f24 100644
> --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> @@ -41,6 +41,11 @@
>  			};
>  		};
>  
> +		/* OTG */
> +		usb1_phy:phy@12500000 {
> +			status = "ok";
> +		};
> +
>  		usb3_phy:phy@12520000 {
>  			status = "ok";
>  		};
> @@ -48,7 +53,16 @@
>  		usb4_phy:phy@12530000 {
>  			status = "ok";
>  		};
> -		
> +
> +		gadget1:gadget@12500000 {
> +			status = "ok";
> +		};
> +
> +		/* OTG */
> +		usb1: usb@12500000 {
> +			status = "ok";
> +		};
> +
>  		usb3: usb@12520000 {
>  			status = "ok";
>  		};
> 

-- 
Regards,
Igor.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux