Add an 85C passive trip point to ensure the thermal framework takes sufficient action to prevent reaching junction temperature and a 110C critical point to help avoid hw damage. Remove the copypasta-from-downstream userspace governor entries while at it. Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 48 ++++++++++++++---------------------- 1 file changed, 18 insertions(+), 30 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index ee60fd257efe..38e8d3e9dd43 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -4928,28 +4928,22 @@ map0 { }; trips { - thermal-engine-config { - temperature = <125000>; + gpu_top_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; - }; - - reset-mon-cfg { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; + type = "hot"; }; - gpu_top_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; @@ -4967,28 +4961,22 @@ map0 { }; trips { - thermal-engine-config { - temperature = <125000>; + gpu_bottom_alert0: trip-point0 { + temperature = <85000>; hysteresis = <1000>; type = "passive"; }; - thermal-hal-config { - temperature = <125000>; + trip-point1 { + temperature = <90000>; hysteresis = <1000>; - type = "passive"; - }; - - reset-mon-cfg { - temperature = <115000>; - hysteresis = <5000>; - type = "passive"; + type = "hot"; }; - gpu_bottom_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <5000>; - type = "passive"; + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; }; }; }; -- 2.40.1