Add an 85C passive trip point to ensure the thermal framework takes sufficient action to prevent reaching junction temperature and a 110C critical point to help avoid hw damage. Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 1a1202bdd915..b734aa13fd2e 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -6855,10 +6855,22 @@ map0 { trips { gpu_top_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; @@ -6988,10 +7000,22 @@ map0 { trips { gpu_bottom_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { temperature = <90000>; - hysteresis = <2000>; + hysteresis = <1000>; type = "hot"; }; + + trip-point2 { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; }; -- 2.40.1