Since the discharge register has been moved to another position,
the modification is to fit the new register setting.
Signed-off-by: Alina Yu <alina_yu@xxxxxxxxxxx>
---
v3
- Seperate LDO vsel and discharge change to seperate patches
---
drivers/regulator/rtq2208-regulator.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/regulator/rtq2208-regulator.c b/drivers/regulator/rtq2208-regulator.c
index 00da787..cea8e77 100644
--- a/drivers/regulator/rtq2208-regulator.c
+++ b/drivers/regulator/rtq2208-regulator.c
@@ -41,7 +41,9 @@
#define RTQ2208_EN_DIS_MASK BIT(0)
#define RTQ2208_BUCK_RAMP_SEL_MASK GENMASK(2, 0)
#define RTQ2208_HD_INT_MASK BIT(0)
+#define RTQ2208_LDO1_DISCHG_EN_MASK BIT(4)
#define RTQ2208_LDO1_VOSEL_SD_MASK BIT(5)
+#define RTQ2208_LDO2_DISCHG_EN_MASK BIT(6)
#define RTQ2208_LDO2_VOSEL_SD_MASK BIT(7)
/* Size */
@@ -339,11 +341,12 @@ static irqreturn_t rtq2208_irq_handler(int irqno, void *devid)
.name = _name, \
.base = RTQ2208_REG_LDO##_id##_CFG, \
.enable_reg = RTQ2208_REG_LDO##_id##_CFG, \
+ .dis_mask = RTQ2208_LDO##_id##_DISCHG_EN_MASK, \
+ .dis_on = RTQ2208_LDO##_id##_DISCHG_EN_MASK, \
.vsel_mask = RTQ2208_LDO##_id##_VOSEL_SD_MASK, \
}
#define BUCK_RG_SHIFT(_base, _shift) (_base + _shift)
-#define LDO_RG_SHIFT(_base, _shift) (_base + _shift)
#define VSEL_SHIFT(_sel) (_sel ? 3 : 1)
#define MTP_SEL_MASK(_sel) RTQ2208_BUCK_EN_NR_MTP_SEL##_sel##_MASK
@@ -422,9 +425,7 @@ static void rtq2208_init_regulator_desc(struct rtq2208_regulator_desc *rdesc, in
desc->owner = THIS_MODULE;
desc->type = REGULATOR_VOLTAGE;
desc->enable_mask = mtp_sel ? MTP_SEL_MASK(1) : MTP_SEL_MASK(0);
- desc->active_discharge_on = RTQ2208_EN_DIS_MASK;
desc->active_discharge_off = 0;
- desc->active_discharge_mask = RTQ2208_EN_DIS_MASK;
desc->enable_reg = curr_info->enable_reg;
rdesc->mode_mask = RTQ2208_BUCK_NRMODE_MASK;
@@ -438,8 +439,10 @@ static void rtq2208_init_regulator_desc(struct rtq2208_regulator_desc *rdesc, in
desc->linear_ranges = rtq2208_vout_range;
desc->n_linear_ranges = ARRAY_SIZE(rtq2208_vout_range);
desc->ramp_reg = BUCK_RG_SHIFT(curr_info->base, 5);
- desc->active_discharge_reg = curr_info->base;
desc->of_map_mode = rtq2208_of_map_mode;
+ desc->active_discharge_reg = curr_info->dis_reg;
+ desc->active_discharge_on = RTQ2208_EN_DIS_MASK;
+ desc->active_discharge_mask = RTQ2208_EN_DIS_MASK;
rdesc->mode_reg = BUCK_RG_SHIFT(curr_info->base, 2);
rdesc->suspend_config_reg = BUCK_RG_SHIFT(curr_info->base, 4);
@@ -447,9 +450,11 @@ static void rtq2208_init_regulator_desc(struct rtq2208_regulator_desc *rdesc, in
rdesc->suspend_mode_mask = RTQ2208_BUCK_STRMODE_MASK;
} else {
/* init ldo desc */
- desc->active_discharge_reg = LDO_RG_SHIFT(curr_info->base, 2);
desc->vsel_reg = RTQ2208_REG_LDO_DVS_CTRL;
desc->vsel_mask = curr_info->vsel_mask;
+ desc->active_discharge_reg = RTQ2208_REG_LDO_DVS_CTRL;
+ desc->active_discharge_on = curr_info->dis_on;
+ desc->active_discharge_mask = curr_info->dis_mask;
rdesc->suspend_config_reg = curr_info->base;
rdesc->suspend_enable_mask = RTQ2208_LDO_EN_STR_MASK;
--
2.7.4
