On Fri, 10 May 2024 14:40:52 +0800, Mariel Tinaco wrote: > This adds the bindings documentation for the 14-bit > High Voltage, High Current, Waveform Generator > Digital-to-Analog converter. > > Signed-off-by: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx> > --- > .../bindings/iio/dac/adi,ad8460.yaml | 67 +++++++++++++++++++ > MAINTAINERS | 7 ++ > 2 files changed, 74 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dts:22.17-27: Warning (reg_format): /example-0/spi/dac@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dts:19.13-29.11: Warning (spi_bus_bridge): /example-0/spi: incorrect #address-cells for SPI bus Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dts:19.13-29.11: Warning (spi_bus_bridge): /example-0/spi: incorrect #size-cells for SPI bus Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dts:20.19-28.15: Warning (avoid_default_addr_size): /example-0/spi/dac@0: Relying on default #address-cells value Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dts:20.19-28.15: Warning (avoid_default_addr_size): /example-0/spi/dac@0: Relying on default #size-cells value Documentation/devicetree/bindings/iio/dac/adi,ad8460.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size' doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240510064053.278257-2-Mariel.Tinaco@xxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
