From: Nicolas Dechesne <nicolas.dechesne@xxxxxxxxxx> This patch adds PCIE support to APQ8064, tested with Ethernet on Compulab QS600 board. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@xxxxxxxxxx> --- arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 5d75666..6e62f24 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -1,4 +1,5 @@ #include "qcom-apq8064-v2.0.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "CompuLab CM-QS600"; @@ -40,6 +41,24 @@ }; }; + /* on board fixed 3.3v supply */ + v3p3_pcieclk: v3p3-pcieclk { + compatible = "regulator-fixed"; + regulator-name = "PCIE V3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + pci@1b500000 { + status = "ok"; + pcie-clk-supply = <&v3p3_pcieclk>; + avdd-supply = <&pm8921_s3>; + vdd-supply = <&pm8921_lvs6>; + qcom,external-phy-refclk; + reset-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html