Add device node for video clock controller on Qualcomm SM8150 platform. Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sa8155p.dtsi | 4 ++++ arch/arm64/boot/dts/qcom/sm8150.dtsi | 14 ++++++++++++++ 2 files changed, 18 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sa8155p.dtsi b/arch/arm64/boot/dts/qcom/sa8155p.dtsi index ffb7ab695213..9e70effc72e1 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8155p.dtsi @@ -38,3 +38,7 @@ &rpmhpd { */ compatible = "qcom,sa8155p-rpmhpd"; }; + +&videocc { + power-domains = <&rpmhpd SA8155P_CX>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index a35c0852b5a1..55c9046f4fb9 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/clock/qcom,dispcc-sm8150.h> #include <dt-bindings/clock/qcom,gcc-sm8150.h> #include <dt-bindings/clock/qcom,gpucc-sm8150.h> +#include <dt-bindings/clock/qcom,videocc-sm8150.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sm8150.h> #include <dt-bindings/thermal/thermal.h> @@ -3715,6 +3716,19 @@ usb_2_dwc3: usb@a800000 { }; }; + videocc: clock-controller@ab00000 { + compatible = "qcom,sm8150-videocc"; + reg = <0 0x0ab00000 0 0x10000>; + clocks = <&gcc GCC_VIDEO_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bi_tcxo"; + power-domains = <&rpmhpd SM8150_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + camnoc_virt: interconnect@ac00000 { compatible = "qcom,sm8150-camnoc-virt"; reg = <0 0x0ac00000 0 0x1000>; -- 2.25.1