By now, more Loongson-2K2000 related drivers are supported, such as
clock controller and thermal controller.
Now we add these device nodes to the Loongson-2K2000 dts file.
Signed-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
---
arch/loongarch/boot/dts/loongson-2k2000.dtsi | 48 ++++++++++++++++++--
1 file changed, 44 insertions(+), 4 deletions(-)
diff --git a/arch/loongarch/boot/dts/loongson-2k2000.dtsi b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
index 780d3da6755b..85086604671d 100644
--- a/arch/loongarch/boot/dts/loongson-2k2000.dtsi
+++ b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
@@ -6,6 +6,7 @@
/dts-v1/;
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/loongson,ls2k-clk.h>
/ {
#address-cells = <2>;
@@ -19,21 +20,22 @@ cpu0: cpu@1 {
compatible = "loongson,la364";
device_type = "cpu";
reg = <0x0>;
- clocks = <&cpu_clk>;
+ clocks = <&clk LOONGSON2_NODE_CLK>;
};
cpu1: cpu@2 {
compatible = "loongson,la364";
device_type = "cpu";
reg = <0x1>;
- clocks = <&cpu_clk>;
+ clocks = <&clk LOONGSON2_NODE_CLK>;
};
};
- cpu_clk: cpu-clk {
+ ref_100m: clock-ref-100m {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <1400000000>;
+ clock-frequency = <100000000>;
+ clock-output-names = "ref_100m";
};
cpuintc: interrupt-controller {
@@ -42,6 +44,28 @@ cpuintc: interrupt-controller {
interrupt-controller;
};
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tsensor 0>;
+
+ trips {
+ cpu-alert {
+ temperature = <40000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu-crit {
+ temperature = <85000>;
+ hysteresis = <5000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
bus@10000000 {
compatible = "simple-bus";
ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
@@ -58,6 +81,14 @@ isa@18400000 {
ranges = <1 0x0 0x0 0x18400000 0x4000>;
};
+ clk: clock-controller@10010480 {
+ compatible = "loongson,ls2k2000-clk";
+ reg = <0x0 0x10010480 0x0 0x100>;
+ #clock-cells = <1>;
+ clocks = <&ref_100m>;
+ clock-names = "ref_100m";
+ };
+
pmc: power-management@100d0000 {
compatible = "loongson,ls2k2000-pmc", "loongson,ls2k0500-pmc", "syscon";
reg = <0x0 0x100d0000 0x0 0x58>;
@@ -80,6 +111,15 @@ syscon-poweroff {
};
};
+ tsensor: thermal-sensor@1fe01460 {
+ compatible = "loongson,ls2k2000-thermal";
+ reg = <0x0 0x1fe01460 0x0 0x30>,
+ <0x0 0x1fe0019c 0x0 0x4>;
+ interrupt-parent = <&liointc>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
+ };
+
liointc: interrupt-controller@1fe01400 {
compatible = "loongson,liointc-1.0";
reg = <0x0 0x1fe01400 0x0 0x64>;
--
2.43.0
