On Thu, 09 May 2024 05:05:42 +1200, Chris Packham wrote: > Add documentation for the pwm-initial-duty-cycle and > pwm-initial-frequency properties. These allow the starting state of the > PWM outputs to be set to cater for hardware designs where undesirable > amounts of noise is created by the default hardware state. > > Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> > --- > .../devicetree/bindings/hwmon/adt7475.yaml | 26 ++++++++++++++++++- > 1 file changed, 25 insertions(+), 1 deletion(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/adt7475.example.dtb: hwmon@2e: adi,pwm-initial-frequency:0:1: 0 is not one of [11, 14, 22, 29, 35, 44, 58, 88, 22500] from schema $id: http://devicetree.org/schemas/hwmon/adt7475.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240508170544.263059-2-chris.packham@xxxxxxxxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.