By now, more Loongson-2K0500 related drivers are supported, such as clock controller, thermal controller, and dma controller. Now we add these device nodes to the Loongson-2K0500 dts file. Signed-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx> --- .../boot/dts/loongson-2k0500-ref.dts | 4 + arch/loongarch/boot/dts/loongson-2k0500.dtsi | 81 ++++++++++++++++++- 2 files changed, 82 insertions(+), 3 deletions(-) diff --git a/arch/loongarch/boot/dts/loongson-2k0500-ref.dts b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts index 8aefb0c12672..62dad6297e82 100644 --- a/arch/loongarch/boot/dts/loongson-2k0500-ref.dts +++ b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts @@ -41,6 +41,10 @@ linux,cma { }; }; +&clk { + status = "okay"; +}; + &gmac0 { status = "okay"; diff --git a/arch/loongarch/boot/dts/loongson-2k0500.dtsi b/arch/loongarch/boot/dts/loongson-2k0500.dtsi index 444779c21034..14345093631a 100644 --- a/arch/loongarch/boot/dts/loongson-2k0500.dtsi +++ b/arch/loongarch/boot/dts/loongson-2k0500.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/loongson,ls2k-clk.h> / { #address-cells = <2>; @@ -19,14 +20,15 @@ cpu0: cpu@0 { compatible = "loongson,la264"; device_type = "cpu"; reg = <0x0>; - clocks = <&cpu_clk>; + clocks = <&clk LOONGSON2_NODE_CLK>; }; }; - cpu_clk: cpu-clk { + ref_100m: clock-ref-100m { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <500000000>; + clock-frequency = <100000000>; + clock-output-names = "ref_100m"; }; cpuintc: interrupt-controller { @@ -35,6 +37,22 @@ cpuintc: interrupt-controller { interrupt-controller; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tsensor 0>; + + trips { + cpu-crit { + temperature = <85000>; + hysteresis = <5000>; + type = "critical"; + }; + }; + }; + }; + bus@10000000 { compatible = "simple-bus"; ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>, @@ -52,6 +70,55 @@ isa@16400000 { ranges = <1 0x0 0x0 0x16400000 0x4000>; }; + clk: clock-controller@1fe10400 { + compatible = "loongson,ls2k0500-clk"; + reg = <0x0 0x1fe10400 0x0 0x2c>; + #clock-cells = <1>; + clocks = <&ref_100m>; + clock-names = "ref_100m"; + status = "disabled"; + }; + + dma-controller@1fe10c00 { + compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma"; + reg = <0 0x1fe10c00 0 0x8>; + interrupt-parent = <&eiointc>; + interrupts = <67>; + clocks = <&clk LOONGSON2_APB_CLK>; + #dma-cells = <1>; + status = "disabled"; + }; + + dma-controller@1fe10c10 { + compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma"; + reg = <0 0x1fe10c10 0 0x8>; + interrupt-parent = <&eiointc>; + interrupts = <68>; + clocks = <&clk LOONGSON2_APB_CLK>; + #dma-cells = <1>; + status = "disabled"; + }; + + dma-controller@1fe10c20 { + compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma"; + reg = <0 0x1fe10c20 0 0x8>; + interrupt-parent = <&eiointc>; + interrupts = <69>; + clocks = <&clk LOONGSON2_APB_CLK>; + #dma-cells = <1>; + status = "disabled"; + }; + + dma-controller@1fe10c30 { + compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma"; + reg = <0 0x1fe10c30 0 0x8>; + interrupt-parent = <&eiointc>; + interrupts = <70>; + clocks = <&clk LOONGSON2_APB_CLK>; + #dma-cells = <1>; + status = "disabled"; + }; + liointc0: interrupt-controller@1fe11400 { compatible = "loongson,liointc-2.0"; reg = <0x0 0x1fe11400 0x0 0x40>, @@ -139,6 +206,14 @@ ohci0: usb@1f058000 { status = "disabled"; }; + tsensor: thermal-sensor@1fe11500 { + compatible = "loongson,ls2k0500-thermal", "loongson,ls2k1000-thermal"; + reg = <0x0 0x1fe11500 0x0 0x30>; + interrupt-parent = <&liointc0>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; + uart0: serial@1ff40800 { compatible = "ns16550a"; reg = <0x0 0x1ff40800 0x0 0x10>; -- 2.43.0