Re: [PATCH 1/5] dt-bindings: display: panel: mipi-dbi-spi: Add a pixel format property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 07, 2024 at 11:57:26AM +0200, Noralf Trønnes wrote:
> The MIPI DBI 2.0 specification (2005) lists only two pixel formats for
> the Type C Interface (SPI) and that is 3-bits/pixel RGB111 with
> 2 options for bit layout.
> 
> For Type A and B (parallel) the following formats are listed: RGB332,
> RGB444, RGB565, RGB666 and RGB888 (some have 2 options for the bit layout).
> 
> Many MIPI DBI compatible controllers support all interface types on the
> same chip and often the manufacturers have chosen to provide support for
> the Type A/B interface pixel formats also on the Type C interface.
> 
> Some chips provide many pixel formats with optional bit layouts over SPI,
> but the most common by far are RGB565 and RGB666. So even if the
> specification doesn't list these formats for the Type C interface, the
> industry has chosen to include them.
> 
> The MIPI DCS specification lists the standard commands that can be sent
> over the MIPI DBI interface. The set_address_mode (36h) command has one
> bit in the parameter that controls RGB/BGR order:
>     This bit controls the RGB data latching order transferred from the
>     peripheral’s frame memory to the display device.
> This means that each supported RGB format also has a BGR variant.
> 
> Based on this rationale document the following pixel formats describing
> the bit layout going over the wire:
> - RGB111 (option 1): x2r1g1b1r1g1b1 (2 pixels per byte)
> - BGR111 (option 1): x2b1g1r1b1g1r1 (2 pixels per byte)
> - RGB111 (option 2): x1r1g1b1x1r1g1b1 (2 pixels per byte)
> - BGR111 (option 2): x1b1g1r1x1b1g1r1 (2 pixels per byte)
> - RGB565: r5g6b5 (2 bytes)
> - BGR565: b5g6r5 (2 bytes)
> - RGB666: r6x2g6x2b6x2 (3 bytes)
> - BGR666: b6x2g6x2r6x2 (3 bytes)
> (x: don't care)
> 
> Signed-off-by: Noralf Trønnes <noralf@xxxxxxxxxxx>
> ---
>  .../bindings/display/panel/panel-mipi-dbi-spi.yaml | 31 ++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
> index e808215cb39e..dac8f9af100e 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
> @@ -50,6 +50,12 @@ description: |
>        |        Command or data         |
>        |<D7><D6><D5><D4><D3><D2><D1><D0>|
>  
> +  The standard defines one pixel format for type C: RGB111. The industry
> +  however has decided to provide the type A/B interface pixel formats also on
> +  the Type C interface and most common among these are RGB565 and RGB666.
> +  The MIPI DCS command set_address_mode (36h) has one bit that controls RGB/BGR
> +  order. This gives each supported RGB format a BGR variant.
> +
>    The panel resolution is specified using the panel-timing node properties
>    hactive (width) and vactive (height). The other mandatory panel-timing
>    properties should be set to zero except clock-frequency which can be
> @@ -90,6 +96,29 @@ properties:
>  
>    spi-3wire: true
>  
> +  format:
> +    description: >
> +      Pixel format in bit order as going on the wire:
> +        * `x2r1g1b1r1g1b1` - RGB111, 2 pixels per byte
> +        * `x2b1g1r1b1g1r1` - BGR111, 2 pixels per byte
> +        * `x1r1g1b1x1r1g1b1` - RGB111, 2 pixels per byte
> +        * `x1b1g1r1x1b1g1r1` - BGR111, 2 pixels per byte
> +        * `r5g6b5` - RGB565, 2 bytes
> +        * `b5g6r5` - BGR565, 2 bytes
> +        * `r6x2g6x2b6x2` - RGB666, 3 bytes
> +        * `b6x2g6x2r6x2` - BGR666, 3 bytes
> +      This property is optional for backwards compatibility and `r5g6b5` is
> +      assumed in its absence.

Use schemas, not free form text:

default: r5g6b5

> +    enum:
> +      - x2r1g1b1r1g1b1
> +      - x2b1g1r1b1g1r1
> +      - x1r1g1b1x1r1g1b1
> +      - x1b1g1r1x1b1g1r1
> +      - r5g6b5
> +      - b5g6r5
> +      - r6x2g6x2b6x2
> +      - b6x2g6x2r6x2
> +
>  required:
>    - compatible
>    - reg
> @@ -116,6 +145,8 @@ examples:
>              reset-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
>              write-only;
>  
> +            format = "r5g6b5";
> +
>              backlight = <&backlight>;
>  
>              width-mm = <35>;
> 
> -- 
> 2.45.0
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux