Re: [PATCH v4 3/3] arch: arm64: dts: sm8650-hdk: add support for the Display Card overlay

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 4/22/24 10:48, Neil Armstrong wrote:
With the SM8650-HDK, a Display Card kit can be connected to provide
a VTDR6130 display with Goodix Berlin Touch controller.

In order to route the DSI lanes to the connector for the Display
Card kit, a switch must be changed on the board.

The HDMI nodes are disabled since the DSI lanes are shared with
the DSI to HDMI transceiver.

Add support for this card as an overlay and apply it it at
build-time to the sm8650-hdk dtb.

Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---

After testing this on real hardware and getting some word, it turns out
there's an issue with what seems like the SMMU ACL settings, preventing
the display bridge I2C controller from being accessed and ending up in
the board being unbootable, even without directly addressing the bridge.

Not mergable as-is.

Konrad




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux