Change the clock property in TH1520 uart nodes to a clock provided by
AP_SUBSYS clock controller.
Signed-off-by: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
---
arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 4 ----
.../boot/dts/thead/th1520-lichee-module-4a.dtsi | 4 ----
arch/riscv/boot/dts/thead/th1520.dtsi | 24 +++++++++++-----------
3 files changed, 12 insertions(+), 20 deletions(-)
diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
index d9b4de9e4757..164afd18b56c 100644
--- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
+++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
@@ -52,10 +52,6 @@ &sdhci_clk {
clock-frequency = <198000000>;
};
-&uart_sclk {
- clock-frequency = <100000000>;
-};
-
&dmac0 {
status = "okay";
};
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
index 1365d3a512a3..1b7ede570994 100644
--- a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
@@ -33,10 +33,6 @@ &sdhci_clk {
clock-frequency = <198000000>;
};
-&uart_sclk {
- clock-frequency = <100000000>;
-};
-
&dmac0 {
status = "okay";
};
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index e193f8d9ab8a..963c786f3c53 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -141,12 +141,6 @@ apb_clk: apb-clk-clock {
#clock-cells = <0>;
};
- uart_sclk: uart-sclk-clock {
- compatible = "fixed-clock";
- clock-output-names = "uart_sclk";
- #clock-cells = <0>;
- };
-
sdhci_clk: sdhci-clock {
compatible = "fixed-clock";
clock-frequency = <198000000>;
@@ -196,7 +190,8 @@ uart0: serial@ffe7014000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xe7014000 0x0 0x100>;
interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_sclk>;
+ clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART0_PCLK>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
@@ -233,7 +228,8 @@ uart1: serial@ffe7f00000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xe7f00000 0x0 0x100>;
interrupts = <37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_sclk>;
+ clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART1_PCLK>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
@@ -243,7 +239,8 @@ uart3: serial@ffe7f04000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xe7f04000 0x0 0x100>;
interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_sclk>;
+ clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART3_PCLK>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
@@ -325,7 +322,8 @@ uart2: serial@ffec010000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xec010000 0x0 0x4000>;
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_sclk>;
+ clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART2_PCLK>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
@@ -387,7 +385,8 @@ uart4: serial@fff7f08000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xf7f08000 0x0 0x4000>;
interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_sclk>;
+ clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART4_PCLK>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
@@ -397,7 +396,8 @@ uart5: serial@fff7f0c000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xf7f0c000 0x0 0x4000>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_sclk>;
+ clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART5_PCLK>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
--
2.34.1
