ping... On Sat, 2024-03-23 at 10:38 +0800, Zhi Mao wrote: > This series adds YAML DT binding and V4L2 sub-device driver for > Galaxycore's > GC08A3 8-megapixel 10-bit RAW CMOS 1/4" sensor, with an MIPI CSI-2 > image data > interface and the I2C control bus. > > The driver is implemented with V4L2 framework. > - Async registered as a V4L2 sub-device. > - As the first component of camera system including Seninf, ISP > pipeline. > - A media entity that provides one source pad in common. > - Used in camera features on ChromeOS application. > > Also this driver supports following features: > - manual exposure and analog gain control support > - vertical blanking control support > - test pattern support > - media controller support > - runtime PM support > - support resolution: 3264x2448@30fps, 1920x1080@60fps > > Previous versions of this patch-set can be found here: > v7: > https://lore.kernel.org/linux-media/20240303022609.26263-1-zhi.mao@xxxxxxxxxxxx/ > v6: > https://lore.kernel.org/linux-media/20240227013221.21512-1-zhi.mao@xxxxxxxxxxxx/ > v5: > https://lore.kernel.org/linux-media/20240220012540.10607-1-zhi.mao@xxxxxxxxxxxx/ > v4: > https://lore.kernel.org/linux-media/20240204061538.2105-1-zhi.mao@xxxxxxxxxxxx/ > v3: > https://lore.kernel.org/linux-media/20240109022715.30278-1-zhi.mao@xxxxxxxxxxxx/ > v2: > https://lore.kernel.org/linux-media/20231207052016.25954-1-zhi.mao@xxxxxxxxxxxx/ > v1: > https://lore.kernel.org/linux-media/20231123115104.32094-1-zhi.mao@xxxxxxxxxxxx/ > > This series is based on linux-next, tag: next-20240323 > Changes in v8: > - gc08a3 sensor driver: > -- use function: pm_runtime_get_if_active() > > Thanks > > Zhi Mao (2): > media: dt-bindings: i2c: add GalaxyCore GC08A3 image sensor > media: i2c: Add GC08A3 image sensor driver > > .../bindings/media/i2c/galaxycore,gc08a3.yaml | 112 ++ > drivers/media/i2c/Kconfig | 10 + > drivers/media/i2c/Makefile | 1 + > drivers/media/i2c/gc08a3.c | 1339 > +++++++++++++++++ > 4 files changed, 1462 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/media/i2c/galaxycore,gc08a3.yaml > create mode 100644 drivers/media/i2c/gc08a3.c >
