On Mon, 06 May 2024 13:37:53 +0200, Farouk Bouabid wrote: > Mule is an MCU that emulates a set of i2c devices which are reachable > through an i2c-mux. > > The emulated devices share a single i2c address with the mux core itself > where the requested register is what determines which logic is executed > (mux logic or device logic). > > Add support for the Mule I2C multiplexer bindings. > > Signed-off-by: Farouk Bouabid <farouk.bouabid@xxxxxxxxx> > --- > .../devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml | 80 ++++++++++++++++++++++ > 1 file changed, 80 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.example.dtb: fan@18: '#cooling-cells' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/trivial-devices.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240506-dev-mule-i2c-mux-v2-2-a91c954f65d7@xxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.