[PATCH v2 1/7] dt-bindings: pci: xilinx-nwl: Add phys

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add phys properties so Linux can power-on/configure the GTR
transcievers.

Signed-off-by: Sean Anderson <sean.anderson@xxxxxxxxx>
---

Changes in v2:
- Remove phy-names
- Add an example

 Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
index 426f90a47f35..693b29039a9b 100644
--- a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
@@ -61,6 +61,10 @@ properties:
   interrupt-map:
     maxItems: 4
 
+  phys:
+    minItems: 1
+    maxItems: 4
+
   power-domains:
     maxItems: 1
 
@@ -110,6 +114,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
     #include <dt-bindings/power/xlnx-zynqmp-power.h>
     soc {
         #address-cells = <2>;
@@ -138,6 +143,7 @@ examples:
                             <0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
                             <0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
             msi-parent = <&nwl_pcie>;
+            phys = <&psgtr 0 PHY_TYPE_PCIE 0 0>;
             power-domains = <&zynqmp_firmware PD_PCIE>;
             iommus = <&smmu 0x4d0>;
             pcie_intc: legacy-interrupt-controller {
-- 
2.35.1.1320.gc452695387.dirty





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux