[PATCH 0/2] MIPI DSI phy for rk3588

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This adds the phy driver need for DSI output on rk3588.

The phy itself is used for both DSI output and CSI input, though the
CSI part for the whole chain needs a lot more work, so is left out for
now and only the DSI part implemented.

This allows the rk3588 with its current VOP support to drive a DSI display
using the DSI2 controller driver I'll submit in a next step.

Only generic phy interfaces are used, so the DSI part is pretty straight
forward.


Heiko Stuebner (2):
  dt-bindings: phy: Add Rockchip MIPI CSI/DSI PHY schema
  phy: rockchip: Add Samsung CSI/DSI Combo DCPHY driver

 .../phy/rockchip,rk3588-mipi-dcphy.yaml       |   76 +
 drivers/phy/rockchip/Kconfig                  |   12 +
 drivers/phy/rockchip/Makefile                 |    1 +
 .../phy/rockchip/phy-rockchip-samsung-dcphy.c | 1609 +++++++++++++++++
 4 files changed, 1698 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/rockchip,rk3588-mipi-dcphy.yaml
 create mode 100644 drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c

-- 
2.39.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux