This patch series introduces support for RISC-V IOMMU architected
hardware into the Linux kernel.
The RISC-V IOMMU specification, which this series is based on, is
ratified and available at GitHub/riscv-non-isa [1].
At a high level, the RISC-V IOMMU specification defines:
1) Data structures:
- Device-context: Associates devices with address spaces and holds
per-device parameters for address translations.
- Process-contexts: Associates different virtual address spaces based
on device-provided process identification numbers.
- MSI page table configuration used to direct an MSI to a guest
interrupt file in an IMSIC.
2) In-memory queue interface:
- Command-queue for issuing commands to the IOMMU.
- Fault/event queue for reporting faults and events.
- Page-request queue for reporting "Page Request" messages received
from PCIe devices.
- Message-signaled and wire-signaled interrupt mechanisms.
3) Memory-mapped programming interface:
- Mandatory and optional register layout and description.
- Software guidelines for device initialization and capabilities discovery.
This series introduces RISC-V IOMMU hardware initialization and complete
single-stage translation with paging domain support.
The patches are organized as follows:
Patch 1: Introduces minimal required device tree bindings for the driver.
Patch 2: Defines RISC-V IOMMU data structures, hardware programming interface
registers layout, and minimal initialization code for enabling global
pass-through for all connected masters.
Patch 3: Implements the device driver for PCIe implementation of RISC-V IOMMU
architected hardware.
Patch 4: Introduces IOMMU interfaces to the kernel subsystem.
Patch 5: Implements device directory management with discovery sequences for
I/O mapped or in-memory device directory table location, hardware
capabilities discovery, and device to domain attach implementation.
Patch 6: Implements command and fault queue, and introduces directory cache
invalidation sequences.
Patch 7: Implements paging domain, using highest page-table mode advertised
by the hardware. This series enables only 4K mappings; complete support
for large page mappings will be introduced in follow-up patch series.
Follow-up patch series, providing large page support and updated walk cache
management based on the revised specification, and complete ATS/PRI/SVA support,
will be posted to GitHub [2].
Changes from v3:
- dt-bindings: s/qemu,iommu/qemu,riscv-iommu/, fix iommu-map sample
- device probe will fail if IOMMU if running in restricted BARE mode
- synchronize_rcu moved to release_device, fixes for bonds locking, iotlb_inval fix
- page table radix tree selection based on IOMMU capabilities, failover to use SATP
- private iommu per device data structure added
- Editorial changes: rename goto labels, blocking_domain/blocking_domain, reformat
to fit mostly under 80 characters per line
Patch series depends on (applied to iommu-next):
IOMMU memory observability, v6 [3]
iommu, dma-mapping: Simplify arch_setup_dma_ops(), v4 [4]
Best regards,
Tomasz Jeznach
[1] link: https://github.com/riscv-non-isa/riscv-iommu
[2] link: https://github.com/tjeznach/linux
[3] link: https://lore.kernel.org/linux-iommu/20240413002522.1101315-1-pasha.tatashin@xxxxxxxxxx/
[4] link: https://lore.kernel.org/linux-iommu/cover.1713523152.git.robin.murphy@xxxxxxx/
v3 link: https://lore.kernel.org/linux-iommu/cover.1714494653.git.tjeznach@xxxxxxxxxxxx/
v2 link: https://lore.kernel.org/linux-iommu/cover.1713456597.git.tjeznach@xxxxxxxxxxxx/
v1 link: https://lore.kernel.org/linux-iommu/cover.1689792825.git.tjeznach@xxxxxxxxxxxx/
Tomasz Jeznach (7):
dt-bindings: iommu: riscv: Add bindings for RISC-V IOMMU
iommu/riscv: Add RISC-V IOMMU platform device driver
iommu/riscv: Add RISC-V IOMMU PCIe device driver
iommu/riscv: Enable IOMMU registration and device probe.
iommu/riscv: Device directory management.
iommu/riscv: Command and fault queue support
iommu/riscv: Paging domain support
.../bindings/iommu/riscv,iommu.yaml | 147 ++
MAINTAINERS | 8 +
drivers/iommu/Kconfig | 1 +
drivers/iommu/Makefile | 2 +-
drivers/iommu/riscv/Kconfig | 20 +
drivers/iommu/riscv/Makefile | 3 +
drivers/iommu/riscv/iommu-bits.h | 782 ++++++++
drivers/iommu/riscv/iommu-pci.c | 119 ++
drivers/iommu/riscv/iommu-platform.c | 92 +
drivers/iommu/riscv/iommu.c | 1616 +++++++++++++++++
drivers/iommu/riscv/iommu.h | 88 +
11 files changed, 2877 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/iommu/riscv,iommu.yaml
create mode 100644 drivers/iommu/riscv/Kconfig
create mode 100644 drivers/iommu/riscv/Makefile
create mode 100644 drivers/iommu/riscv/iommu-bits.h
create mode 100644 drivers/iommu/riscv/iommu-pci.c
create mode 100644 drivers/iommu/riscv/iommu-platform.c
create mode 100644 drivers/iommu/riscv/iommu.c
create mode 100644 drivers/iommu/riscv/iommu.h
base-commit: e67572cd2204894179d89bd7b984072f19313b03
message-id: 20240413002522.1101315-1-pasha.tatashin@xxxxxxxxxx
message-id: cover.1713523152.git.robin.murphy@xxxxxxx
--
2.34.1
