On Fri, 03 May 2024 16:20:47 +0200, Théo Lebrun wrote: > Switch from sub-nodes in system-controller for each functionality to a > single node representing the entire OLB instance. dt-bindings is > unnecessary and soc/mobileye/mobileye,eyeq5-olb.yaml will inherit all > properties. > > Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx> > --- > .../bindings/reset/mobileye,eyeq5-reset.yaml | 43 ---------------------- > 1 file changed, 43 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dtb: /example-0/remoteproc@cd00000: failed to match any schema with compatible: ['qcom,ipq8074-wcss-pil'] Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.example.dtb: /example-1/syscon@20e00000: failed to match any schema with compatible: ['sprd,sc9863a-glbregs', 'syscon', 'simple-mfd'] Documentation/devicetree/bindings/clock/milbeaut-clock.example.dtb: /example-2/serial@1e700010: failed to match any schema with compatible: ['socionext,milbeaut-usio-uart'] Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.example.dtb: /example-0/peripheral-controller@8a20000/phy@850: failed to match any schema with compatible: ['hisilicon,hi3798cv200-combphy'] Documentation/devicetree/bindings/sound/st,stm32-sai.example.dtb: /example-0/sai@4400b000/audio-controller@4400b004: failed to match any schema with compatible: ['st,stm32-sai-sub-a'] Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.example.dtb: /example-0/avs-monitor@7d5d2000: failed to match any schema with compatible: ['brcm,bcm2711-avs-monitor', 'syscon', 'simple-mfd'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240503-mbly-olb-v2-2-95ce5a1e18fe@xxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
