On Thu, May 2, 2024 at 9:58 PM Andreas Kemnade <andreas@xxxxxxxxxxxx> wrote:
>
> The chip is similar, but has status bits at different positions,
> so use the correct bits.
...
> + if (ts->shifted_status) {
> + ektf2127_report2_contact(ts, 0, &buf[1], !!(buf[7] & 1));
> + ektf2127_report2_contact(ts, 1, &buf[4], !!(buf[7] & 2));
BIT(0)
BIT(1)
> + } else {
> + ektf2127_report2_contact(ts, 0, &buf[1], !!(buf[7] & 2));
> + ektf2127_report2_contact(ts, 1, &buf[4], !!(buf[7] & 4));
BIT(1)
BIT(2)
> + }
...
> + if (dev->of_node &&
> + of_device_is_compatible(dev->of_node, "elan,ektf2232"))
if (device_is_compatible(...))
> + ts->shifted_status = true;
--
With Best Regards,
Andy Shevchenko
