On 01/05/2024 18:16, Eddie James wrote:
>
> On 4/30/24 02:35, Krzysztof Kozlowski wrote:
>> On 29/04/2024 23:01, Eddie James wrote:
>>> Convert to json-schema for the FSI-attached I2C controller.
>>>
>>> Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx>
>>> ---
>>> Changes since v3:
>>> - Update MAINTAINERS
>>> - Change commit message to match similar commits
>>>
>>> .../devicetree/bindings/i2c/i2c-fsi.txt | 40 -------------
>>> .../devicetree/bindings/i2c/ibm,i2c-fsi.yaml | 58 +++++++++++++++++++
>>
>> Please split independent patches to separate patchsets, so they can be
>> reviewed and picked up by respective maintainers.
>>
>> I don't see any dependency here. Neither in 1st patch.
>
>
> OK, I guess that makes it complicated for Andrew to pull together with
> the device tree changes in a way that avoids warnings, but I agree there
> is no direct dependency.
SoC tree should not pull subsystem patches. Plus DTS must be separate
from drivers...
>>> +
>>> +examples:
>>> + - |
>>> + i2c@1800 {
>>> + compatible = "ibm,i2c-fsi";
>>> + reg = <0x1800 0x400>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + i2c-bus@0 {
>>> + reg = <0>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>> This does not look right. Why do you have multiple i2c-bus children? I
>> do not think i2c-controller.yaml schema allows this.
>
>
> It does seem to allow it, as this validates here and in the device tree.
Only because children are treated as I2C devices.
> It is this way because the I2C controller provides multiple busses.
It does not look like I2C controller anymore. I think I2C controller
sits on the bus, not on multiple busses. How are SDA/SCL lines connected?
This looks like you are describing something which is not I2C bus
controller as I2C bus controller...
I'll let I2C maintainer comment on that - is this real I2C bus which
consists of multiple buses.
> Should I change it so to add "bus" pattern properties that reference
> i2c-controller.yaml?
Not sure if I get it right... whatever is the I2C bus controller, should
reference i2c-controller.yaml. Not some other entity.
Best regards,
Krzysztof
