[PATCH v2 2/2] arm: dts: aspeed-g6: Add nodes for i3c controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the i3c controller devices to the ast2600 g6 common dts. We add all
6 busses to the common g6 definition, but leave disabled through the
status property, to be enabled per-platform.

Signed-off-by: Jeremy Kerr <jk@xxxxxxxxxxxxxxxxxxxx>

--
v2:
 - use inline bus representation, without the i3c: label
---
 arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 94 +++++++++++++++++++++++++
 1 file changed, 94 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 96ceb08cf0cb..5d8f4e752912 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -1092,6 +1092,100 @@ i2c15: i2c-bus@800 {
 				};
 			};
 
+			/* i3c mapping, containing global & per-controller
+			 * register sets */
+			bus@1e7a0000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e7a0000 0x8000>;
+
+				i3c_global: i3c-global {
+					compatible = "aspeed,ast2600-i3c-global",
+						   "syscon", "simple-mfd";
+					reg = <0x0 0x1000>;
+					resets = <&syscon ASPEED_RESET_I3C_DMA>;
+				};
+
+				i3c0: i3c@2000 {
+					compatible = "aspeed,ast2600-i3c";
+					reg = <0x2000 0x1000>;
+					#address-cells = <3>;
+					#size-cells = <0>;
+					clocks = <&syscon ASPEED_CLK_GATE_I3C0CLK>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i3c1_default>;
+					interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+					aspeed,global-regs = <&i3c_global 0>;
+					status = "disabled";
+				};
+
+				i3c1: i3c@3000 {
+					compatible = "aspeed,ast2600-i3c";
+					reg = <0x3000 0x1000>;
+					#address-cells = <3>;
+					#size-cells = <0>;
+					clocks = <&syscon ASPEED_CLK_GATE_I3C1CLK>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i3c2_default>;
+					interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+					aspeed,global-regs = <&i3c_global 1>;
+					status = "disabled";
+				};
+
+				i3c2: i3c@4000 {
+					compatible = "aspeed,ast2600-i3c";
+					reg = <0x4000 0x1000>;
+					#address-cells = <3>;
+					#size-cells = <0>;
+					clocks = <&syscon ASPEED_CLK_GATE_I3C2CLK>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i3c3_default>;
+					interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+					aspeed,global-regs = <&i3c_global 2>;
+					status = "disabled";
+				};
+
+				i3c3: i3c@5000 {
+					compatible = "aspeed,ast2600-i3c";
+					reg = <0x5000 0x1000>;
+					#address-cells = <3>;
+					#size-cells = <0>;
+					clocks = <&syscon ASPEED_CLK_GATE_I3C3CLK>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i3c4_default>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+					aspeed,global-regs = <&i3c_global 3>;
+					status = "disabled";
+				};
+
+				i3c4: i3c@6000 {
+					compatible = "aspeed,ast2600-i3c";
+					reg = <0x6000 0x1000>;
+					#address-cells = <3>;
+					#size-cells = <0>;
+					clocks = <&syscon ASPEED_CLK_GATE_I3C4CLK>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i3c5_default>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+					aspeed,global-regs = <&i3c_global 4>;
+					status = "disabled";
+				};
+
+				i3c5: i3c@7000 {
+					compatible = "aspeed,ast2600-i3c";
+					reg = <0x7000 0x1000>;
+					#address-cells = <3>;
+					#size-cells = <0>;
+					clocks = <&syscon ASPEED_CLK_GATE_I3C5CLK>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i3c6_default>;
+					interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+					aspeed,global-regs = <&i3c_global 5>;
+					status = "disabled";
+				};
+			};
+
 			fsim0: fsi@1e79b000 {
 				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
 				reg = <0x1e79b000 0x94>;
-- 
2.39.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux