ROHM BD96801 is a highly configurable automotive grade PMIC. Introduce
DT bindings for the BD96801 regulators.
Signed-off-by: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
---
RFCv2 => v1
- Drop regulator-name pattern requirement
- do not require regulator-name
---
.../regulator/rohm,bd96801-regulator.yaml | 62 +++++++++++++++++++
1 file changed, 62 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml
new file mode 100644
index 000000000000..1b96ae60064d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd96801-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD96801 Power Management Integrated Circuit regulators
+
+maintainers:
+ - Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
+
+description: |
+ This module is part of the ROHM BD96801 MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml.
+
+ The regulator controller is represented as a sub-node of the PMIC node
+ on the device tree.
+
+ Regulator nodes should be named to BUCK_<number> and LDO_<number>.
+ The valid names for BD96801 regulator nodes are
+ BUCK1, BUCK2, BUCK3, BUCK4, LDO5, LDO6, LDO7
+
+patternProperties:
+ "^LDO[5-7]$":
+ type: object
+ description:
+ Properties for single LDO regulator.
+ $ref: regulator.yaml#
+
+ properties:
+ rohm,initial-voltage-microvolt:
+ description:
+ Initial voltage for regulator. Voltage can be tuned +/-150 mV from
+ this value. NOTE, This can be modified via I2C only when PMIC is in
+ STBY state.
+ minimum: 300000
+ maximum: 3300000
+
+ unevaluatedProperties: false
+
+ "^BUCK[1-4]$":
+ type: object
+ description:
+ Properties for single BUCK regulator.
+ $ref: regulator.yaml#
+
+ properties:
+ rohm,initial-voltage-microvolt:
+ description:
+ Initial voltage for regulator. Voltage can be tuned +/-150 mV from
+ this value. NOTE, This can be modified via I2C only when PMIC is in
+ STBY state.
+ minimum: 500000
+ maximum: 3300000
+ rohm,keep-on-stby:
+ description:
+ Keep the regulator powered when PMIC transitions to STBY state.
+ type: boolean
+
+ unevaluatedProperties: false
+
+additionalProperties: false
--
2.44.0
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
Attachment:
signature.asc
Description: PGP signature
