If master clock is provided through device tree, then update
the master clock frequency during set_sysclk.
Cc: Tushar Behera <tushar.behera@xxxxxxxxxx>
Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
---
sound/soc/codecs/max98088.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c
index 69a21d1946e3..1aa81321afba 100644
--- a/sound/soc/codecs/max98088.c
+++ b/sound/soc/codecs/max98088.c
@@ -16,6 +16,7 @@
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
+#include <linux/clk.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -42,6 +43,7 @@ struct max98088_priv {
struct regmap *regmap;
enum max98088_type devtype;
struct max98088_pdata *pdata;
+ struct clk *mclk;
unsigned int sysclk;
struct max98088_cdata dai[2];
int eq_textcnt;
@@ -1361,6 +1363,11 @@ static int max98088_dai_set_sysclk(struct snd_soc_dai *dai,
if (freq == max98088->sysclk)
return 0;
+ if (!IS_ERR(max98088->mclk)) {
+ freq = clk_round_rate(max98088->mclk, freq);
+ clk_set_rate(max98088->mclk, freq);
+ }
+
/* Setup clocks for slave mode, and using the PLL
* PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
* 0x02 (when master clk is 20MHz to 30MHz)..
@@ -1568,6 +1575,19 @@ static int max98088_set_bias_level(struct snd_soc_codec *codec,
break;
case SND_SOC_BIAS_PREPARE:
+ /*
+ * SND_SOC_BIAS_PREPARE is called while preparing for a
+ * transition to ON or away from ON. If current bias_level
+ * is SND_SOC_BIAS_ON, then it is preparing for a transition
+ * away from ON. Disable the clock in that case, otherwise
+ * enable it.
+ */
+ if (!IS_ERR(max98088->mclk)) {
+ if (codec->dapm.bias_level == SND_SOC_BIAS_ON)
+ clk_disable_unprepare(max98088->mclk);
+ else
+ clk_prepare_enable(max98088->mclk);
+ }
break;
case SND_SOC_BIAS_STANDBY:
@@ -1900,6 +1920,10 @@ static int max98088_probe(struct snd_soc_codec *codec)
max98088->sysclk = (unsigned)-1;
max98088->eq_textcnt = 0;
+ max98088->mclk = devm_clk_get(codec->dev, "mclk");
+ if (PTR_ERR(max98088->mclk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
cdata = &max98088->dai[0];
cdata->rate = (unsigned)-1;
cdata->fmt = (unsigned)-1;
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
