This makes the LEDs on the PXA Spitz board use GPIO descriptors instead of hardcoded GPIOs from the global numberspace. Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- arch/arm/mach-pxa/spitz.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index cc691b199429..36aec5ea7218 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -456,12 +456,21 @@ static struct gpio_led spitz_gpio_leds[] = { { .name = "spitz:amber:charge", .default_trigger = "sharpsl-charge", - .gpio = SPITZ_GPIO_LED_ORANGE, }, { .name = "spitz:green:hddactivity", .default_trigger = "disk-activity", - .gpio = SPITZ_GPIO_LED_GREEN, + }, +}; + +static struct gpiod_lookup_table spitz_gpio_leds_table = { + .dev_id = "leds-gpio", + .table = { + GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_LED_ORANGE, NULL, + 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_LED_GREEN, NULL, + 1, GPIO_ACTIVE_HIGH), + { }, }, }; @@ -480,6 +489,7 @@ static struct platform_device spitz_led_device = { static void __init spitz_leds_init(void) { + gpiod_add_lookup_table(&spitz_gpio_leds_table); platform_device_register(&spitz_led_device); } #else -- 2.44.0