Re: [PATCH v12 6/6] PCI: qcom: Add OPP support to scale performance

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Apr 27, 2024 at 07:22:39AM +0530, Krishna chaitanya chundru wrote:
> QCOM Resource Power Manager-hardened (RPMh) is a hardware block which
> maintains hardware state of a regulator by performing max aggregation of
> the requests made by all of the clients.
> 
> PCIe controller can operate on different RPMh performance state of power
> domain based on the speed of the link. And this performance state varies
> from target to target, like some controllers support GEN3 in NOM (Nominal)
> voltage corner, while some other supports GEN3 in low SVS (static voltage
> scaling).
> 
> The SoC can be more power efficient if we scale the performance state
> based on the aggregate PCIe link bandwidth.
> 
> Add Operating Performance Points (OPP) support to vote for RPMh state based
> on the aggregate link bandwidth.
> 
> OPP can handle ICC bw voting also, so move ICC bw voting through OPP
> framework if OPP entries are present.
> 
> As we are moving ICC voting as part of OPP, don't initialize ICC if OPP
> is supported.
> 
> Before PCIe link is initialized vote for highest OPP in the OPP table,
> so that we are voting for maximum voltage corner for the link to come up
> in maximum supported speed.
> 
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 81 ++++++++++++++++++++++++++++------
>  1 file changed, 67 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 465d63b4be1c..40c875c518d8 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c

[...]

> @@ -1661,6 +1711,9 @@ static int qcom_pcie_suspend_noirq(struct device *dev)
>  		ret = icc_disable(pcie->icc_cpu);
>  		if (ret)
>  			dev_err(dev, "Failed to disable CPU-PCIe interconnect path: %d\n", ret);
> +
> +		if (!pcie->icc_mem)
> +			dev_pm_opp_set_opp(pcie->pci->dev, NULL);

At the start of the suspend, there is a call to icc_set_bw() for PCIe-MEM path.
Don't you want to update it too?

- Mani

-- 
மணிவண்ணன் சதாசிவம்




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux