On 29/04/2024 14:43, Dmitry Baryshkov wrote:
The lanes from the USB-C SS port are connected to the combo USB+DP QMP PHY rather than the SS port of the USB controller. Move the connection endpoint to the QMP PHY out port. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts index d04ceaa73c2b..819f6eadba07 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts @@ -59,7 +59,7 @@ port@1 { reg = <1>;pmic_glink_ss_in: endpoint {- remote-endpoint = <&usb_1_dwc3_ss>; + remote-endpoint = <&usb_dp_qmpphy_out>; }; }; }; @@ -853,10 +853,6 @@ &usb_1_dwc3_hs { remote-endpoint = <&pmic_glink_hs_in>; };-&usb_1_dwc3_ss {- remote-endpoint = <&pmic_glink_ss_in>; -}; - &usb_1_hsphy { vdd-supply = <&vreg_l1i_0p88>; vdda12-supply = <&vreg_l3i_1p2>; @@ -873,6 +869,10 @@ &usb_dp_qmpphy { status = "okay"; };+&usb_dp_qmpphy_out {+ remote-endpoint = <&pmic_glink_ss_in>; +}; + &xo_board { clock-frequency = <76800000>; };
Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
