On Mon, 29 Apr 2024 08:56:34 +0800, Inochi Amaoto wrote: > Due to the design, Sophgo SG2042 use an external MCU to provide > hardware information, thermal information and reset control. > > Add bindings for this monitor device. > > Signed-off-by: Inochi Amaoto <inochiama@xxxxxxxxxxx> > --- > .../hwmon/sophgo,sg2042-hwmon-mcu.yaml | 40 +++++++++++++++++++ > 1 file changed, 40 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename $id: http://devicetree.org/schemas/soc/sophgo/sophgo,sg2042-hwmon-mcu.yaml file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/IA1PR20MB495302443F9B18EB1A0DDF65BB1B2@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.