Per VisionFive 2 1.2B, and 1.3A boards' SCH, GPIO 41 is used as
card detect. So add "cd-gpios" property for this.
Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxx>
---
arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 910c07bd4af9..b6030d63459d 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -303,7 +303,7 @@ &mmc1 {
bus-width = <4>;
no-sdio;
no-mmc;
- broken-cd;
+ cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
cap-sd-highspeed;
post-power-on-delay-ms = <200>;
pinctrl-names = "default";
--
2.43.0
