Re: [PATCH v2 02/11] dt-bindings: net: add phy-supply property for stm32

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 26, 2024 at 02:56:58PM +0200, Christophe Roullier wrote:
> Phandle to a regulator that provides power to the PHY. This
> regulator will be managed during the PHY power on/off sequence.
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> Signed-off-by: Christophe Roullier <christophe.roullier@xxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> index b901a432dfa9..7c3aa181abcb 100644
> --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> @@ -84,6 +84,9 @@ properties:
>            - description: offset of the control register
>            - description: field to set mask in register
>  
> +  phy-supply:
> +    description: PHY regulator

This is for which PHY? The serdes phy or ethernet phy? This only makes 
sense here if the phy is part of the MAC. Otherwise, it belongs in the 
phy node.

Rob




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux