Add Ethernet support for STM32MP13. STM32MP13 is STM32 SOC with 2 GMACs instances. GMAC IP version is SNPS 4.20. GMAC IP configure with 1 RX and 1 TX queue. DMA HW capability register supported RX Checksum Offload Engine supported TX Checksum insertion supported Wake-Up On Lan supported TSO supported Signed-off-by: Christophe Roullier <christophe.roullier@xxxxxxxxxxx> --- .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c index 68a02de25ac7..7529a8d15492 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c @@ -517,9 +517,30 @@ static struct stm32_ops stm32mp1_dwmac_data = { } }; +static struct stm32_ops stm32mp13_dwmac_data = { + .set_mode = stm32mp1_set_mode, + .suspend = stm32mp1_suspend, + .resume = stm32mp1_resume, + .parse_data = stm32mp1_parse_data, + .clk_rx_enable_in_suspend = true, + .syscfg_clr_off = 0x08, + .pmcsetr = { + .eth1_clk_sel = BIT(16), + .eth1_ref_clk_sel = BIT(17), + .eth1_selmii = 0, + .eth1_sel_rgmii = BIT(21), + .eth1_sel_rmii = BIT(23), + .eth2_clk_sel = BIT(24), + .eth2_ref_clk_sel = BIT(25), + .eth2_sel_rgmii = BIT(29), + .eth2_sel_rmii = BIT(31) + } +}; + static const struct of_device_id stm32_dwmac_match[] = { { .compatible = "st,stm32-dwmac", .data = &stm32mcu_dwmac_data}, { .compatible = "st,stm32mp1-dwmac", .data = &stm32mp1_dwmac_data}, + { .compatible = "st,stm32mp13-dwmac", .data = &stm32mp13_dwmac_data}, { } }; MODULE_DEVICE_TABLE(of, stm32_dwmac_match); -- 2.25.1