This option is intended to be set for SoCs that have HCI_V2P1_CTRL
register and can select their tick source via IA_TICK_SEL bit.
Source clock selection for timer tick
0x0 = Bus clock (aclk)
0x1 = Function clock (mclk)
Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Tested-by: Will McVicker <willmcvicker@xxxxxxxxxx>
---
drivers/ufs/host/ufs-exynos.c | 9 +++++++++
drivers/ufs/host/ufs-exynos.h | 1 +
2 files changed, 10 insertions(+)
diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index 66e52c3607e2..66093a905986 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -50,6 +50,8 @@
#define HCI_ERR_EN_N_LAYER 0x80
#define HCI_ERR_EN_T_LAYER 0x84
#define HCI_ERR_EN_DME_LAYER 0x88
+#define HCI_V2P1_CTRL 0x8C
+#define IA_TICK_SEL BIT(16)
#define HCI_CLKSTOP_CTRL 0xB0
#define REFCLKOUT_STOP BIT(4)
#define MPHY_APBCLK_STOP BIT(3)
@@ -1005,6 +1007,13 @@ static void exynos_ufs_fit_aggr_timeout(struct exynos_ufs *ufs)
{
u32 val;
+ /* Select function clock (mclk) for timer tick */
+ if (ufs->opts & EXYNOS_UFS_OPT_TIMER_TICK_SELECT) {
+ val = hci_readl(ufs, HCI_V2P1_CTRL);
+ val |= IA_TICK_SEL;
+ hci_writel(ufs, val, HCI_V2P1_CTRL);
+ }
+
val = exynos_ufs_calc_time_cntr(ufs, IATOVAL_NSEC / CNTR_DIV_VAL);
hci_writel(ufs, val & CNT_VAL_1US_MASK, HCI_1US_TO_CNT_VAL);
}
diff --git a/drivers/ufs/host/ufs-exynos.h b/drivers/ufs/host/ufs-exynos.h
index 0fc21b6bbfcd..acf07cc54684 100644
--- a/drivers/ufs/host/ufs-exynos.h
+++ b/drivers/ufs/host/ufs-exynos.h
@@ -222,6 +222,7 @@ struct exynos_ufs {
#define EXYNOS_UFS_OPT_USE_SW_HIBERN8_TIMER BIT(4)
#define EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR BIT(5)
#define EXYNOS_UFS_OPT_UFSPR_SECURE BIT(6)
+#define EXYNOS_UFS_OPT_TIMER_TICK_SELECT BIT(7)
};
#define for_each_ufs_rx_lane(ufs, i) \
--
2.44.0.769.g3c40516874-goog
