Re: [PATCH v7 4/4] arm64: dts: qcom: aim300: add AIM300 AIoT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 4/25/2024 7:50 AM, Dmitry Baryshkov wrote:
On Wed, 24 Apr 2024 at 05:46, Tengfei Fan <quic_tengfan@xxxxxxxxxxx> wrote:

Add AIM300 AIoT Carrier board DTS support, including usb, UART, PCIe,
I2C functions support.
Here is a diagram of AIM300 AIoT Carrie Board and SoM
  +--------------------------------------------------+
  |             AIM300 AIOT Carrier Board            |
  |                                                  |
  |           +-----------------+                    |
  |power----->| Fixed regulator |---------+          |
  |           +-----------------+         |          |
  |                                       |          |
  |                                       v VPH_PWR  |
  | +----------------------------------------------+ |
  | |                          AIM300 SOM |        | |
  | |                                     |VPH_PWR | |
  | |                                     v        | |
  | |   +-------+       +--------+     +------+    | |
  | |   | UFS   |       | QCS8550|     |PMIC  |    | |
  | |   +-------+       +--------+     +------+    | |
  | |                                              | |
  | +----------------------------------------------+ |
  |                                                  |
  |                    +----+          +------+      |
  |                    |USB |          | UART |      |
  |                    +----+          +------+      |
  +--------------------------------------------------+

Co-developed-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
Signed-off-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
Co-developed-by: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/Makefile             |   1 +
  .../boot/dts/qcom/qcs8550-aim300-aiot.dts     | 343 ++++++++++++++++++
  2 files changed, 344 insertions(+)
  create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index f63abb43e9fe..c46c10d85697 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -96,6 +96,7 @@ dtb-$(CONFIG_ARCH_QCOM)       += qcm6490-idp.dtb
  dtb-$(CONFIG_ARCH_QCOM)        += qcs404-evb-1000.dtb
  dtb-$(CONFIG_ARCH_QCOM)        += qcs404-evb-4000.dtb
  dtb-$(CONFIG_ARCH_QCOM)        += qcs6490-rb3gen2.dtb
+dtb-$(CONFIG_ARCH_QCOM)        += qcs8550-aim300-aiot.dtb
  dtb-$(CONFIG_ARCH_QCOM)        += qdu1000-idp.dtb
  dtb-$(CONFIG_ARCH_QCOM)        += qrb2210-rb1.dtb
  dtb-$(CONFIG_ARCH_QCOM)        += qrb4210-rb2.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
new file mode 100644
index 000000000000..146bf6ea9e6a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "qcs8550-aim300.dtsi"
+#include "pm8010.dtsi"
+#include "pmr735d_a.dtsi"
+#include "pmr735d_b.dtsi"
+
+/ {
+       model = "Qualcomm Technologies, Inc. QCS8550 AIM300 AIOT";
+       compatible = "qcom,qcs8550-aim300-aiot", "qcom,qcs8550-aim300", "qcom,qcs8550",
+                    "qcom,sm8550";
+
+       aliases {
+               serial0 = &uart7;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+
+               pinctrl-0 = <&volume_up_n>;
+               pinctrl-names = "default";
+
+               key-volume-up {
+                       label = "Volume Up";
+                       debounce-interval = <15>;
+                       gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_VOLUMEUP>;
+                       linux,can-disable;
+                       wakeup-source;
+               };
+       };
+
+       pmic-glink {
+               compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+
+               connector@0 {
+                       compatible = "usb-c-connector";
+                       reg = <0>;
+                       power-role = "dual";
+                       data-role = "dual";
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               port@0 {
+                                       reg = <0>;
+
+                                       pmic_glink_hs_in: endpoint {
+                                               remote-endpoint = <&usb_1_dwc3_hs>;
+                                       };
+                               };
+
+                               port@1 {
+                                       reg = <1>;
+
+                                       pmic_glink_ss_in: endpoint {
+                                               remote-endpoint = <&redriver_ss_out>;
+                                       };
+                               };
+
+                               port@2 {
+                                       reg = <2>;
+
+                                       pmic_glink_sbu: endpoint {
+                                               remote-endpoint = <&fsa4480_sbu_mux>;
+                                       };
+                               };
+                       };
+               };
+       };
+
+       vph_pwr: regulator-vph-pwr {
+               compatible = "regulator-fixed";
+               regulator-name = "vph_pwr";
+               regulator-min-microvolt = <3700000>;
+               regulator-max-microvolt = <3700000>;
+
+               regulator-always-on;
+               regulator-boot-on;
+       };
+};
+
+&apps_rsc {
+       regulators-0 {
+               vdd-bob1-supply = <&vph_pwr>;
+               vdd-bob2-supply = <&vph_pwr>;
+       };
+
+       regulators-3 {
+               vdd-s4-supply = <&vph_pwr>;
+               vdd-s5-supply = <&vph_pwr>;
+       };
+
+       regulators-4 {
+               vdd-s4-supply = <&vph_pwr>;
+       };
+
+       regulators-5 {
+               vdd-s1-supply = <&vph_pwr>;
+               vdd-s2-supply = <&vph_pwr>;
+               vdd-s3-supply = <&vph_pwr>;
+               vdd-s4-supply = <&vph_pwr>;
+               vdd-s5-supply = <&vph_pwr>;
+               vdd-s6-supply = <&vph_pwr>;
+       };
+};
+
+&i2c_hub_2 {
+       status = "okay";
+
+       typec-mux@42 {
+               compatible = "fcs,fsa4480";
+               reg = <0x42>;
+
+               vcc-supply = <&vreg_bob1>;
+
+               mode-switch;
+               orientation-switch;
+
+               port {
+                       fsa4480_sbu_mux: endpoint {
+                               remote-endpoint = <&pmic_glink_sbu>;
+                       };
+               };
+       };
+
+       typec-retimer@1c {
+               compatible = "onnn,nb7vpq904m";
+               reg = <0x1c>;
+
+               vcc-supply = <&vreg_l15b_1p8>;
+
+               orientation-switch;
+               retimer-switch;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+
+                               redriver_ss_out: endpoint {
+                                       remote-endpoint = <&pmic_glink_ss_in>;
+                               };
+                       };
+
+                       port@1 {
+                               reg = <1>;
+
+                               redriver_ss_in: endpoint {
+                                       data-lanes = <3 2 1 0>;
+                                       remote-endpoint = <&usb_dp_qmpphy_out>;
+                               };
+                       };
+               };
+       };
+};
+
+&mdss_dsi0 {
+       status = "okay";
+
+       panel@0 {
+               compatible = "visionox,vtdr6130";
+               reg = <0>;
+
+               pinctrl-0 = <&dsi_active>, <&te_active>;
+               pinctrl-1 = <&dsi_suspend>, <&te_suspend>;
+               pinctrl-names = "default", "sleep";
+
+               reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+               vci-supply = <&vreg_l13b_3p0>;
+               vdd-supply = <&vreg_l11b_1p2>;
+               vddio-supply = <&vreg_l12b_1p8>;
+
+               port {
+                       panel0_in: endpoint {
+                               remote-endpoint = <&mdss_dsi0_out>;
+                       };
+               };
+       };
+};
+
+&mdss_dsi0_out {
+       remote-endpoint = <&panel0_in>;
+       data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+       status = "okay";
+};
+
+&pcie0 {
+       pinctrl-0 = <&pcie0_default_state>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
+&pcie0_phy {
+       status = "okay";
+};
+
+&pcie1 {
+       pinctrl-0 = <&pcie1_default_state>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
+&pcie1_phy {
+       status = "okay";
+};
+
+&pm8550_gpios {
+       volume_up_n: volume-up-n-state {
+               pins = "gpio6";
+               function = "normal";
+               power-source = <1>;
+               bias-pull-up;
+               input-enable;
+       };
+};
+
+&pon_pwrkey {
+       status = "okay";
+};
+
+&pon_resin {
+       linux,code = <KEY_VOLUMEDOWN>;
+
+       status = "okay";
+};
+
+&qupv3_id_0 {
+       status = "okay";
+};
+
+&remoteproc_adsp {
+       firmware-name = "qcom/qcs8550/adsp.mbn",
+                       "qcom/qcs8550/adsp_dtbs.elf";
+       status = "okay";
+};
+
+&remoteproc_cdsp {
+       firmware-name = "qcom/qcs8550/cdsp.mbn",
+                       "qcom/qcs8550/cdsp_dtbs.elf";
+       status = "okay";
+};
+
+&swr1 {
+       status = "okay";
+};
+
+&swr2 {
+       status = "okay";
+};
+
+&tlmm {
+       gpio-reserved-ranges = <32 8>;
+
+       dsi_active: dsi-active-state {
+               pins = "gpio133";
+               function = "gpio";
+               drive-strength = <8>;
+               bias-disable;
+       };
+
+       dsi_suspend: dsi-suspend-state {
+               pins = "gpio133";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-pull-down;
+       };
+
+       te_active: te-active-state {
+               pins = "gpio86";
+               function = "mdp_vsync";
+               drive-strength = <2>;
+               bias-pull-down;
+       };
+
+       te_suspend: te-suspend-state {
+               pins = "gpio86";
+               function = "mdp_vsync";
+               drive-strength = <2>;
+               bias-pull-down;
+       };
+};
+
+&uart7 {
+       status = "okay";
+};
+
+&usb_1 {
+       status = "okay";
+};
+
+&usb_1_dwc3 {
+       dr_mode = "otg";

OTG is default and can be dropped.

OTG will be dropped.


+       usb-role-switch;

Please move to SoC dtsi and drop from board files.

This will be moved to SoC dtsi.


+};
+
+&usb_1_dwc3_hs {
+       remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+       remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;

This too.

This will be moved to SoC dtsi.


+};
+
+&usb_1_hsphy {
+       status = "okay";
+};
+
+&usb_dp_qmpphy {
+       orientation-switch;

This too

This will be moved to SoC dtsi.


+
+       status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+       remote-endpoint = <&redriver_ss_in>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+       remote-endpoint = <&usb_1_dwc3_ss>;

And this.

This will be moved to SoC dtsi.


+};
--
2.25.1




--
Thx and BRs,
Tengfei Fan




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux