Re: [PATCH v1 2/2] drm/panel: kd101ne3: add new panel driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, Apr 23, 2024 at 2:20 PM Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> wrote:
>
> On Tue, Apr 23, 2024 at 01:41:59PM -0700, Doug Anderson wrote:
> > Hi,
> >
> > On Tue, Apr 23, 2024 at 11:10 AM Hsin-Yi Wang <hsinyi@xxxxxxxxxx> wrote:
> > >
> > > > > > > +#define _INIT_DCS_CMD(...) { \
> > > > > > > +     .type = INIT_DCS_CMD, \
> > > > > > > +     .len = sizeof((char[]){__VA_ARGS__}), \
> > > > > > > +     .data = (char[]){__VA_ARGS__} }
> > > > > > > +
> > > > > > > +#define _INIT_DELAY_CMD(...) { \
> > > > > > > +     .type = DELAY_CMD,\
> > > > > > > +     .len = sizeof((char[]){__VA_ARGS__}), \
> > > > > > > +     .data = (char[]){__VA_ARGS__} }
> > > > > >
> > > > > > This is the third panel driver using the same appoach. Can you use
> > > > > > mipi_dsi_generic_write_seq() instead of the huge table? Or if you prefer
> > > > > > the table, we should extract this framework to a common helper.
> > > > > > (my preference is shifted towards mipi_dsi_generic_write_seq()).
> > > > > >
> > > > > The drawback of mipi_dsi_generic_write_seq() is that it can cause the
> > > > > kernel size grows a lot since every sequence will be expanded.
> > > > >
> > > > > Similar discussion in here:
> > > > > https://lore.kernel.org/dri-devel/CAD=FV=Wju3WS45=EpXMUg7FjYDh3-=mvm_jS7TF1tsaAzbb4Uw@xxxxxxxxxxxxxx/
> > > > >
> > > > > This patch would increase the module size from 157K to 572K.
> > > > > scripts/bloat-o-meter shows chg +235.95%.
> > > > >
> > > > > So maybe the common helper is better regarding the kernel module size?
> > > >
> > > > Yes, let's get a framework done in a useful way.
> > > > I'd say, drop the _INIT_DELAY_CMD. msleep() and usleep_range() should be
> > > > used instead (and it's up to the developer to select correct delay
> > > > function).
> > > >
> > > > >
> > > > > > > +
> > > > > > > +static const struct panel_init_cmd kingdisplay_kd101ne3_init_cmd[] = {
> > > > > > > +     _INIT_DELAY_CMD(50),
> > > > > > > +     _INIT_DCS_CMD(0xE0, 0x00),
> > > >
> > > > [skipped the body of the table]
> > > >
> > > > > > > +     _INIT_DCS_CMD(0x0E, 0x48),
> > > > > > > +
> > > > > > > +     _INIT_DCS_CMD(0xE0, 0x00),
> > > >
> > > > > > > +     _INIT_DCS_CMD(0X11),
> > > >
> > > > Also, at least this is mipi_dsi_dcs_exit_sleep_mode().
> > > >
> > > > > > > +     /* T6: 120ms */
> > > > > > > +     _INIT_DELAY_CMD(120),
> > > > > > > +     _INIT_DCS_CMD(0X29),
> > > >
> > > > And this is mipi_dsi_dcs_set_display_on().
> > > >
> > > > Having a single table enourages people to put known commands into the
> > > > table, the practice that must be frowned upon and forbidden.
> > > >
> > > > We have functions for some of the standard DCS commands. So, maybe
> > > > instead of adding a single-table based approach we can improve
> > > > mipi_dsi_generic_write_seq() to reduce the bloat. E.g. by moving the
> > > > error handling to a common part of enable() / prepare() function.
> > > >
> > >
> > > For this panel, I think it can also refer to how
> > > panel-kingdisplay-kd097d04.c does. Create the table for init cmd data,
> > > not what operation to use, and use mipi_dsi_generic_write_seq() when
> > > looping through the table.
> >
> > Even more similar discussion:
> >
> > https://lore.kernel.org/r/CAD=FV=UGDbNvAMjzWSOvxybGikQcvW9JsRtbxHVg8_97YPEQCA@xxxxxxxxxxxxxx
>
> It seems I skipped that thread.
>
> I'd still suggest a code-based solution compared to table-based one, for
> the reasons I've outlined before. Having a tables puts a pressure on the
> developer to put commands there for which we already have a
> command-specific function.

The problem is that with these panels that need big init sequences the
code based solution is _a lot_ bigger. If it were a few bytes or a
1-2KB then fine, but when Hsin-Yi measured Linus W's attempt to move
from a table to code it was 100K difference in code [1]. I would also
say that having these long init sequences done as separate commands
encourages people to skip checking the return values of each of the
transfer functions and I don't love that idea.

It would be ideal if these panels didn't need these long init
sequences, but I don't have any inside knowledge here saying that they
could be removed. So assume we can't get rid of the init sequences it
feels like we have to find some way to make the tables work for at
least the large chunks of init code and encourage people to make the
tables readable...


[1] https://lore.kernel.org/r/CAD=FV=UFa_AoJQvUT3BTiRs19WCA2xLVeQOU=+nYu_HaE0_c6Q@xxxxxxxxxxxxxx





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux