The phones listed below have Richtek RT5033 PMIC and charger. Add them to the device trees. - Samsung Galaxy A3/A5/A7 2015 - Samsung Galaxy E5/E7 - Samsung Galaxy Grand Max Signed-off-by: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx> --- v2: Split the connector into another patch v3: Skip applied conntector patch --- .../qcom/msm8916-samsung-a2015-common.dtsi | 53 +++++++++++++++++- .../boot/dts/qcom/msm8916-samsung-a3u-eur.dts | 6 ++ .../boot/dts/qcom/msm8916-samsung-a5u-eur.dts | 6 ++ .../boot/dts/qcom/msm8916-samsung-e5.dts | 6 ++ .../boot/dts/qcom/msm8916-samsung-e7.dts | 7 +++ .../dts/qcom/msm8916-samsung-grandmax.dts | 6 ++ .../boot/dts/qcom/msm8939-samsung-a7.dts | 56 ++++++++++++++++++- 7 files changed, 138 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 4bbbee80b5e4..e6355e5e2177 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -28,6 +28,12 @@ tz-apps@85500000 { }; }; + battery: battery { + compatible = "simple-battery"; + precharge-current-microamp = <450000>; + precharge-upper-limit-microvolt = <3500000>; + }; + clk_pwm: pwm { compatible = "clk-pwm"; #pwm-cells = <2>; @@ -245,7 +251,7 @@ magnetometer@12 { &blsp_i2c4 { status = "okay"; - battery@35 { + fuel-gauge@35 { compatible = "richtek,rt5033-battery"; reg = <0x35>; interrupt-parent = <&tlmm>; @@ -253,6 +259,44 @@ battery@35 { pinctrl-names = "default"; pinctrl-0 = <&fg_alert_default>; + + power-supplies = <&charger>; + }; +}; + +&blsp_i2c6 { + status = "okay"; + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&pmic_int_default>; + pinctrl-names = "default"; + + regulators { + rt5033_reg_safe_ldo: SAFE_LDO { + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + + /* + * Needed for camera, but not used yet. + * Define empty nodes to allow disabling the unused + * regulators. + */ + LDO {}; + BUCK {}; + }; + + charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; }; }; @@ -476,6 +520,13 @@ nfc_i2c_default: nfc-i2c-default-state { bias-disable; }; + pmic_int_default: pmic-int-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + sdc2_cd_default: sdc2-cd-default-state { pins = "gpio38"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index 3b934f5eba47..906d31f1ea21 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -55,6 +55,12 @@ &accelerometer { "0", "0", "1"; }; +&battery { + charge-term-current-microamp = <150000>; + constant-charge-current-max-microamp = <1000000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + &blsp_i2c5 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index 391befa22bb4..fe39be7a742b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -29,6 +29,12 @@ &accelerometer { "0", "0", "1"; }; +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1500000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + &blsp_i2c5 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts index fad2535255f7..800cb1038da0 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts @@ -23,6 +23,12 @@ / { chassis-type = "handset"; }; +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1500000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + &blsp_i2c5 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts index b412b61ca258..ec1debd2e245 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts @@ -23,6 +23,13 @@ / { chassis-type = "handset"; }; +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1500000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + + &pm8916_l17 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts index 5882b3a593b8..135df1739dbd 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts @@ -41,6 +41,12 @@ led-keyled { }; }; +&battery { + charge-term-current-microamp = <150000>; + constant-charge-current-max-microamp = <1000000>; + constant-charge-voltage-max-microvolt = <4400000>; +}; + ®_motor_vdd { gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts index 0c599e71a464..91acdb160227 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts @@ -33,6 +33,15 @@ tz-apps@85500000 { }; }; + battery: battery { + compatible = "simple-battery"; + charge-term-current-microamp = <150000>; + constant-charge-current-max-microamp = <1500000>; + constant-charge-voltage-max-microvolt = <4300000>; + precharge-current-microamp = <450000>; + precharge-upper-limit-microvolt = <3500000>; + }; + gpio-hall-sensor { compatible = "gpio-keys"; @@ -82,7 +91,7 @@ i2c-fg { #address-cells = <1>; #size-cells = <0>; - battery@35 { + fuel-gauge@35 { compatible = "richtek,rt5033-battery"; reg = <0x35>; @@ -91,6 +100,8 @@ battery@35 { pinctrl-0 = <&fg_alert_default>; pinctrl-names = "default"; + + power-supplies = <&charger>; }; }; @@ -325,6 +336,42 @@ touchscreen@24 { }; }; +&blsp_i2c6 { + status = "okay"; + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&pmic_int_default>; + pinctrl-names = "default"; + + regulators { + rt5033_reg_safe_ldo: SAFE_LDO { + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + + /* + * Needed for camera, but not used yet. + * Define empty nodes to allow disabling the unused + * regulators. + */ + LDO {}; + BUCK {}; + }; + + charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; + }; +}; + &blsp_uart2 { status = "okay"; }; @@ -510,6 +557,13 @@ nfc_i2c_default: nfc-i2c-default-state { bias-disable; }; + pmic_int_default: pmic-int-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + reg_tsp_en_default: reg-tsp-en-default-state { pins = "gpio73"; function = "gpio"; -- 2.39.2