Joshua Yeong wrote: > StarFive's JH8100 StarLink Cache Controller flush/invalidates cache using non- > conventional RISC-V Zicbom extension instructions. This driver provides the > cache handling on StarFive RISC-V SoC. Hi Joshua, As far as I know you didn't tape out the JH8100 yet, and you seem to have replaced the SiFive cache controller with your own implementation. Can you exlain a bit more about why you didn't implement the perfectly good Zicbom standard instead of adding yet another non-standard work-around like this? /Emil > > Changes in v3: > - Fix code syntax > - Link to v2: https://lore.kernel.org/all/20240423072639.143450-1-joshua.yeong@xxxxxxxxxxxxxxxx/ > > Changes in v2: > - Change patch title from 'Add StarFive's StarLink-500 Cache Controller' > - Remove StarFive alternative from errata framework > - Fixes warning from https://lore.kernel.org/oe-kbuild-all/202403151625.boKDjHGr-lkp@xxxxxxxxx/ > - Flush completion through atomic timeout function > - Link to v1: https://lore.kernel.org/lkml/20240314061205.26143-1-joshua.yeong@xxxxxxxxxxxxxxxx/ > > Joshua Yeong (2): > cache: Add StarFive StarLink cache management for StarFive JH8100 > dt-bindings: cache: Add docs for StarFive Starlink cache controller > > .../cache/starfive,jh8100-starlink-cache.yaml | 66 +++++++++ > drivers/cache/Kconfig | 9 ++ > drivers/cache/Makefile | 5 +- > drivers/cache/starfive_starlink_cache.c | 135 ++++++++++++++++++ > 4 files changed, 213 insertions(+), 2 deletions(-) > create mode 100644 Documentation/devicetree/bindings/cache/starfive,jh8100-starlink-cache.yaml > create mode 100644 drivers/cache/starfive_starlink_cache.c > > -- > 2.25.1 > > > _______________________________________________ > linux-riscv mailing list > linux-riscv@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-riscv