Hello all,
this patchset adds support for i.Core MX93 EDIMM 2.0 Starter Kit,
a SoM + Evaluation Board combination from Engicam.
The number of patch has diminished to 3, for I dropped the
patch introducing a change in nxp,pca9450 binding which has
been already submitted in regulator tree.
(Dropped also regulator tree maintainers as recipients for
they aren't anymore involved in this patchset)
This patchset introduces just basic functionality for board.
Thanks in advance,
fabio
---
v3 ---> v4:
- drop wl_reg_on regulator in favor of
mmc-pwrseq-simple
v2 ---> v3:
- fixed dtschema warnings
- added Acked/Reviewed-by tags
- removed regulator-always-on on
bt_reg_on
- fixed clock rate assignment on
sgtl5000 node
- added wdog_b-warm-reset; property in pmic
- fixed indentation issue
v1 ---> v2:
- dropped patch updating nxp,pca9450 binding
- fixed indentation issue
- fixed missing space issue
- improved naming of regulator nodes
- removed unneeded include
- fixed email recipients
Fabio Aiuto (3):
dt-bindings: arm: fsl: add Engicam i.Core MX93 EDIMM 2.0 Starter Kit
arm64: dts: imx93: add Engicam i.Core MX93 SoM
arm64: dts: imx93: Add Engicam i.Core MX93 EDIMM 2.0 Starter Kit
.../devicetree/bindings/arm/fsl.yaml | 7 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../dts/freescale/imx93-icore-mx93-edimm2.dts | 344 ++++++++++++++++++
.../boot/dts/freescale/imx93-icore-mx93.dtsi | 271 ++++++++++++++
4 files changed, 623 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93.dtsi
--
2.34.1
