[PATCH v2] arm64: dts: qcom: qcm6490-rb3: Enable gpi-dma and qup node

[Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>]

Enable gpi-dma0, gpi-dma1 and qupv3_id_1 nodes for
buses usecase on RB3gen2.

Signed-off-by: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
---

v1 -> v2:
- Move gpi node to correct place.
- Update commit log.
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index a085ff5b5fb2..577bf8560d1e 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -530,6 +530,14 @@
 			   <GCC_WPSS_RSCP_CLK>;
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
 &i2c1 {
 	status = "okay";
 
@@ -606,6 +614,10 @@
 	status = "okay";
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &remoteproc_adsp {
 	firmware-name = "qcom/qcs6490/adsp.mbn";
 	status = "okay";
-- 
2.17.1