Add the C3 PLL clock controller driver for the Amlogic C3 SoC family.
Co-developed-by: Chuan Liu <chuan.liu@xxxxxxxxxxx>
Signed-off-by: Chuan Liu <chuan.liu@xxxxxxxxxxx>
Signed-off-by: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
---
drivers/clk/meson/Kconfig | 14 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/c3-pll.c | 747 +++++++++++++++++++++++++++++++++++++
3 files changed, 762 insertions(+)
create mode 100644 drivers/clk/meson/c3-pll.c
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 29ffd14d267b..9f975a980581 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -128,6 +128,20 @@ config COMMON_CLK_A1_PERIPHERALS
device, A1 SoC Family. Say Y if you want A1 Peripherals clock
controller to work.
+config COMMON_CLK_C3_PLL
+ tristate "Amlogic C3 PLL clock controller"
+ depends on ARM64
+ depends on ARM_SCMI_PROTOCOL
+ depends on COMMON_CLK_SCMI
+ default y
+ select COMMON_CLK_MESON_REGMAP
+ select COMMON_CLK_MESON_PLL
+ select COMMON_CLK_MESON_CLKC_UTILS
+ help
+ Support for the PLL clock controller on Amlogic C302X and C308L devices,
+ AKA C3. Say Y if you want the board to work, because PLLs are the parent
+ of most peripherals.
+
config COMMON_CLK_G12A
tristate "G12 and SM1 SoC clock controllers support"
depends on ARM64
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 9ee4b954c896..4420af628b31 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
+obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
diff --git a/drivers/clk/meson/c3-pll.c b/drivers/clk/meson/c3-pll.c
new file mode 100644
index 000000000000..c84fce1232bd
--- /dev/null
+++ b/drivers/clk/meson/c3-pll.c
@@ -0,0 +1,747 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Amlogic C3 PLL Controller Driver
+ *
+ * Copyright (c) 2023 Amlogic, inc.
+ * Author: Chuan Liu <chuan.liu@xxxxxxxxxxx>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "clk-regmap.h"
+#include "clk-pll.h"
+#include "meson-clkc-utils.h"
+#include <dt-bindings/clock/amlogic,c3-pll-clkc.h>
+
+#define ANACTRL_FIXPLL_CTRL4 0x50
+#define ANACTRL_GP0PLL_CTRL0 0x80
+#define ANACTRL_GP0PLL_CTRL1 0x84
+#define ANACTRL_GP0PLL_CTRL2 0x88
+#define ANACTRL_GP0PLL_CTRL3 0x8c
+#define ANACTRL_GP0PLL_CTRL4 0x90
+#define ANACTRL_GP0PLL_CTRL5 0x94
+#define ANACTRL_GP0PLL_CTRL6 0x98
+#define ANACTRL_HIFIPLL_CTRL0 0x100
+#define ANACTRL_HIFIPLL_CTRL1 0x104
+#define ANACTRL_HIFIPLL_CTRL2 0x108
+#define ANACTRL_HIFIPLL_CTRL3 0x10c
+#define ANACTRL_HIFIPLL_CTRL4 0x110
+#define ANACTRL_HIFIPLL_CTRL5 0x114
+#define ANACTRL_HIFIPLL_CTRL6 0x118
+#define ANACTRL_MPLL_CTRL0 0x180
+#define ANACTRL_MPLL_CTRL1 0x184
+#define ANACTRL_MPLL_CTRL2 0x188
+#define ANACTRL_MPLL_CTRL3 0x18c
+#define ANACTRL_MPLL_CTRL4 0x190
+
+static struct clk_regmap fclk_50m_en = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = ANACTRL_FIXPLL_CTRL4,
+ .bit_idx = 0,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "fclk_50m_en",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "fix"
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor fclk_50m = {
+ .mult = 1,
+ .div = 40,
+ .hw.init = &(struct clk_init_data) {
+ .name = "fclk_50m",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &fclk_50m_en.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor fclk_div2_div = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data) {
+ .name = "fclk_div2_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "fix"
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap fclk_div2 = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = ANACTRL_FIXPLL_CTRL4,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "fclk_div2",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &fclk_div2_div.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor fclk_div2p5_div = {
+ .mult = 2,
+ .div = 5,
+ .hw.init = &(struct clk_init_data) {
+ .name = "fclk_div2p5_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "fix"
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap fclk_div2p5 = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = ANACTRL_FIXPLL_CTRL4,
+ .bit_idx = 4,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "fclk_div2p5",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &fclk_div2p5_div.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor fclk_div3_div = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data) {
+ .name = "fclk_div3_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "fix"
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap fclk_div3 = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = ANACTRL_FIXPLL_CTRL4,
+ .bit_idx = 20,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "fclk_div3",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &fclk_div3_div.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor fclk_div4_div = {
+ .mult = 1,
+ .div = 4,
+ .hw.init = &(struct clk_init_data) {
+ .name = "fclk_div4_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "fix"
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap fclk_div4 = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = ANACTRL_FIXPLL_CTRL4,
+ .bit_idx = 21,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "fclk_div4",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &fclk_div4_div.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor fclk_div5_div = {
+ .mult = 1,
+ .div = 5,
+ .hw.init = &(struct clk_init_data) {
+ .name = "fclk_div5_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "fix"
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap fclk_div5 = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = ANACTRL_FIXPLL_CTRL4,
+ .bit_idx = 22,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "fclk_div5",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &fclk_div5_div.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor fclk_div7_div = {
+ .mult = 1,
+ .div = 7,
+ .hw.init = &(struct clk_init_data) {
+ .name = "fclk_div7_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "fix"
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap fclk_div7 = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = ANACTRL_FIXPLL_CTRL4,
+ .bit_idx = 23,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "fclk_div7",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &fclk_div7_div.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static const struct reg_sequence c3_gp0_init_regs[] = {
+ { .reg = ANACTRL_GP0PLL_CTRL2, .def = 0x0 },
+ { .reg = ANACTRL_GP0PLL_CTRL3, .def = 0x48681c00 },
+ { .reg = ANACTRL_GP0PLL_CTRL4, .def = 0x88770290 },
+ { .reg = ANACTRL_GP0PLL_CTRL5, .def = 0x3927200a },
+ { .reg = ANACTRL_GP0PLL_CTRL6, .def = 0x56540000 },
+};
+
+static const struct pll_mult_range c3_gp0_pll_mult_range = {
+ .min = 125,
+ .max = 250,
+};
+
+static struct clk_regmap gp0_pll_dco = {
+ .data = &(struct meson_clk_pll_data) {
+ .en = {
+ .reg_off = ANACTRL_GP0PLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_GP0PLL_CTRL0,
+ .shift = 0,
+ .width = 9,
+ },
+ .frac = {
+ .reg_off = ANACTRL_GP0PLL_CTRL1,
+ .shift = 0,
+ .width = 19,
+ },
+ .n = {
+ .reg_off = ANACTRL_GP0PLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .l = {
+ .reg_off = ANACTRL_GP0PLL_CTRL0,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = ANACTRL_GP0PLL_CTRL0,
+ .shift = 29,
+ .width = 1,
+ },
+ .range = &c3_gp0_pll_mult_range,
+ .init_regs = c3_gp0_init_regs,
+ .init_count = ARRAY_SIZE(c3_gp0_init_regs),
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "gp0_pll_dco",
+ .ops = &meson_clk_pll_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "top",
+ },
+ .num_parents = 1,
+ },
+};
+
+/* The maximum frequency divider supports is 32, not 128(2^7) */
+static const struct clk_div_table c3_gp0_pll_od_table[] = {
+ { 0, 1 },
+ { 1, 2 },
+ { 2, 4 },
+ { 3, 8 },
+ { 4, 16 },
+ { 5, 32 },
+ { /* sentinel */ }
+};
+
+static struct clk_regmap gp0_pll = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = ANACTRL_GP0PLL_CTRL0,
+ .shift = 16,
+ .width = 3,
+ .table = c3_gp0_pll_od_table,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "gp0_pll",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &gp0_pll_dco.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct reg_sequence c3_hifi_init_regs[] = {
+ { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x0 },
+ { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x6a285c00 },
+ { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x65771290 },
+ { .reg = ANACTRL_HIFIPLL_CTRL5, .def = 0x3927200a },
+ { .reg = ANACTRL_HIFIPLL_CTRL6, .def = 0x56540000 },
+};
+
+static struct clk_regmap hifi_pll_dco = {
+ .data = &(struct meson_clk_pll_data) {
+ .en = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .frac = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL1,
+ .shift = 0,
+ .width = 19,
+ },
+ .n = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .l = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 29,
+ .width = 1,
+ },
+ .range = &c3_gp0_pll_mult_range,
+ .init_regs = c3_hifi_init_regs,
+ .init_count = ARRAY_SIZE(c3_hifi_init_regs),
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hifi_pll_dco",
+ .ops = &meson_clk_pll_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "top",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap hifi_pll = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 16,
+ .width = 2,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hifi_pll",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &hifi_pll_dco.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct reg_sequence c3_mclk_init_regs[] = {
+ { .reg = ANACTRL_MPLL_CTRL1, .def = 0x1420500f },
+ { .reg = ANACTRL_MPLL_CTRL2, .def = 0x00023041 },
+ { .reg = ANACTRL_MPLL_CTRL3, .def = 0x18180000 },
+ { .reg = ANACTRL_MPLL_CTRL2, .def = 0x00023001 }
+};
+
+static const struct pll_mult_range c3_mclk_pll_mult_range = {
+ .min = 67,
+ .max = 133,
+};
+
+static struct clk_regmap mclk_pll_dco = {
+ .data = &(struct meson_clk_pll_data) {
+ .en = {
+ .reg_off = ANACTRL_MPLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_MPLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = ANACTRL_MPLL_CTRL0,
+ .shift = 16,
+ .width = 5,
+ },
+ .l = {
+ .reg_off = ANACTRL_MPLL_CTRL0,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = ANACTRL_MPLL_CTRL0,
+ .shift = 29,
+ .width = 1,
+ },
+ .range = &c3_mclk_pll_mult_range,
+ .init_regs = c3_mclk_init_regs,
+ .init_count = ARRAY_SIZE(c3_mclk_init_regs),
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "mclk_pll_dco",
+ .ops = &meson_clk_pll_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "mclk",
+ },
+ .num_parents = 1,
+ },
+};
+
+static const struct clk_div_table c3_mpll_od_table[] = {
+ { 0, 1 },
+ { 1, 2 },
+ { 2, 4 },
+ { 3, 8 },
+ { 4, 16 },
+ { /* sentinel */ }
+};
+
+static struct clk_regmap mclk_pll_od = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = ANACTRL_MPLL_CTRL0,
+ .shift = 12,
+ .width = 3,
+ .table = c3_mpll_od_table,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "mclk_pll_od",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &mclk_pll_dco.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* both value 0 and 1 gives divide the input rate by one */
+static struct clk_regmap mclk_pll = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = ANACTRL_MPLL_CTRL4,
+ .shift = 16,
+ .width = 5,
+ .flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "mclk_pll",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &mclk_pll_od.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data mclk_parent[] = {
+ { .hw = &mclk_pll.hw },
+ { .fw_name = "mclk" },
+ { .hw = &fclk_50m.hw }
+};
+
+static struct clk_regmap mclk0_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = ANACTRL_MPLL_CTRL4,
+ .mask = 0x3,
+ .shift = 4,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "mclk0_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = mclk_parent,
+ .num_parents = ARRAY_SIZE(mclk_parent),
+ },
+};
+
+static struct clk_regmap mclk0_div_en = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = ANACTRL_MPLL_CTRL4,
+ .bit_idx = 1,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "mclk0_div_en",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &mclk0_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap mclk0_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = ANACTRL_MPLL_CTRL4,
+ .shift = 2,
+ .width = 1,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "mclk0_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &mclk0_div_en.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap mclk0 = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = ANACTRL_MPLL_CTRL4,
+ .bit_idx = 0,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "mclk0",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &mclk0_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap mclk1_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = ANACTRL_MPLL_CTRL4,
+ .mask = 0x3,
+ .shift = 12,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "mclk1_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = mclk_parent,
+ .num_parents = ARRAY_SIZE(mclk_parent),
+ },
+};
+
+static struct clk_regmap mclk1_div_en = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = ANACTRL_MPLL_CTRL4,
+ .bit_idx = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "mclk1_div_en",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &mclk1_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap mclk1_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = ANACTRL_MPLL_CTRL4,
+ .shift = 10,
+ .width = 1,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "mclk1_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &mclk1_div_en.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap mclk1 = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = ANACTRL_MPLL_CTRL4,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "mclk1",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &mclk1_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_hw *c3_pll_hw_clks[] = {
+ [CLKID_FCLK_50M_EN] = &fclk_50m_en.hw,
+ [CLKID_FCLK_50M] = &fclk_50m.hw,
+ [CLKID_FCLK_DIV2_DIV] = &fclk_div2_div.hw,
+ [CLKID_FCLK_DIV2] = &fclk_div2.hw,
+ [CLKID_FCLK_DIV2P5_DIV] = &fclk_div2p5_div.hw,
+ [CLKID_FCLK_DIV2P5] = &fclk_div2p5.hw,
+ [CLKID_FCLK_DIV3_DIV] = &fclk_div3_div.hw,
+ [CLKID_FCLK_DIV3] = &fclk_div3.hw,
+ [CLKID_FCLK_DIV4_DIV] = &fclk_div4_div.hw,
+ [CLKID_FCLK_DIV4] = &fclk_div4.hw,
+ [CLKID_FCLK_DIV5_DIV] = &fclk_div5_div.hw,
+ [CLKID_FCLK_DIV5] = &fclk_div5.hw,
+ [CLKID_FCLK_DIV7_DIV] = &fclk_div7_div.hw,
+ [CLKID_FCLK_DIV7] = &fclk_div7.hw,
+ [CLKID_GP0_PLL_DCO] = &gp0_pll_dco.hw,
+ [CLKID_GP0_PLL] = &gp0_pll.hw,
+ [CLKID_HIFI_PLL_DCO] = &hifi_pll_dco.hw,
+ [CLKID_HIFI_PLL] = &hifi_pll.hw,
+ [CLKID_MCLK_PLL_DCO] = &mclk_pll_dco.hw,
+ [CLKID_MCLK_PLL_OD] = &mclk_pll_od.hw,
+ [CLKID_MCLK_PLL] = &mclk_pll.hw,
+ [CLKID_MCLK0_SEL] = &mclk0_sel.hw,
+ [CLKID_MCLK0_SEL_EN] = &mclk0_div_en.hw,
+ [CLKID_MCLK0_DIV] = &mclk0_div.hw,
+ [CLKID_MCLK0] = &mclk0.hw,
+ [CLKID_MCLK1_SEL] = &mclk1_sel.hw,
+ [CLKID_MCLK1_SEL_EN] = &mclk1_div_en.hw,
+ [CLKID_MCLK1_DIV] = &mclk1_div.hw,
+ [CLKID_MCLK1] = &mclk1.hw
+};
+
+/* Convenience table to populate regmap in .probe */
+static struct clk_regmap *const c3_pll_clk_regmaps[] = {
+ &fclk_50m_en,
+ &fclk_div2,
+ &fclk_div2p5,
+ &fclk_div3,
+ &fclk_div4,
+ &fclk_div5,
+ &fclk_div7,
+ &gp0_pll_dco,
+ &gp0_pll,
+ &hifi_pll_dco,
+ &hifi_pll,
+ &mclk_pll_dco,
+ &mclk_pll_od,
+ &mclk_pll,
+ &mclk0_sel,
+ &mclk0_div_en,
+ &mclk0_div,
+ &mclk0,
+ &mclk1_sel,
+ &mclk1_div_en,
+ &mclk1_div,
+ &mclk1,
+};
+
+static struct regmap_config clkc_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = ANACTRL_MPLL_CTRL4,
+};
+
+static struct meson_clk_hw_data c3_pll_clks = {
+ .hws = c3_pll_hw_clks,
+ .num = ARRAY_SIZE(c3_pll_hw_clks),
+};
+
+static int aml_c3_pll_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ void __iomem *base;
+ int clkid, ret, i;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ /* Populate regmap for the regmap backed clocks */
+ for (i = 0; i < ARRAY_SIZE(c3_pll_clk_regmaps); i++)
+ c3_pll_clk_regmaps[i]->map = regmap;
+
+ for (clkid = 0; clkid < c3_pll_clks.num; clkid++) {
+ /* array might be sparse */
+ if (!c3_pll_clks.hws[clkid])
+ continue;
+
+ ret = devm_clk_hw_register(dev, c3_pll_clks.hws[clkid]);
+ if (ret) {
+ dev_err(dev, "Clock registration failed\n");
+ return ret;
+ }
+ }
+
+ return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get,
+ &c3_pll_clks);
+}
+
+static const struct of_device_id c3_pll_clkc_match_table[] = {
+ {
+ .compatible = "amlogic,c3-pll-clkc",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, c3_pll_clkc_match_table);
+
+static struct platform_driver c3_pll_driver = {
+ .probe = aml_c3_pll_probe,
+ .driver = {
+ .name = "c3-pll-clkc",
+ .of_match_table = c3_pll_clkc_match_table,
+ },
+};
+
+module_platform_driver(c3_pll_driver);
+MODULE_AUTHOR("Chuan Liu <chuan.liu@xxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
--
2.39.2
