RE: [PATCH v3 1/6] Documentation: firmware-guide: add NXP i.MX95 SCMI documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sudeep,

> Subject: [PATCH v3 1/6] Documentation: firmware-guide: add NXP i.MX95
> SCMI documentation

Does this documentation looks good to you?

Thanks,
Peng.
> 
> From: Peng Fan <peng.fan@xxxxxxx>
> 
> Add NXP i.MX95 System Control Management Interface(SCMI) vendor
> extensions protocol documentation.
> 
> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> ---
>  Documentation/firmware-guide/index.rst          |  10 +
>  Documentation/firmware-guide/nxp/imx95-scmi.rst | 877
> ++++++++++++++++++++++++
>  Documentation/firmware-guide/nxp/index.rst      |  10 +
>  3 files changed, 897 insertions(+)
> 
> diff --git a/Documentation/firmware-guide/index.rst
> b/Documentation/firmware-guide/index.rst
> index 5355784ca0a2..8f66ae31337e 100644
> --- a/Documentation/firmware-guide/index.rst
> +++ b/Documentation/firmware-guide/index.rst
> @@ -4,6 +4,9 @@
>  The Linux kernel firmware guide
>  ===============================
> 
> +ACPI subsystem
> +==============
> +
>  This section describes the ACPI subsystem in Linux from firmware perspective.
> 
>  .. toctree::
> @@ -11,3 +14,10 @@ This section describes the ACPI subsystem in Linux
> from firmware perspective.
> 
>     acpi/index
> 
> +NXP firmware
> +============
> +
> +.. toctree::
> +   :maxdepth: 1
> +
> +   nxp/index
> diff --git a/Documentation/firmware-guide/nxp/imx95-scmi.rst
> b/Documentation/firmware-guide/nxp/imx95-scmi.rst
> new file mode 100644
> index 000000000000..bd87a961e4a5
> --- /dev/null
> +++ b/Documentation/firmware-guide/nxp/imx95-scmi.rst
> @@ -0,0 +1,877 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +.. include:: <isonum.txt>
> +
> +=================================================================
> ==============
> +i.MX95 System Control and Management Interface(SCMI) Vendor Protocols
> Extension
> +=================================================================
> ==============
> +
> +:Copyright: |copy| 2024 NXP
> +
> +:Author: Peng Fan <peng.fan@xxxxxxx>
> +
> +The System Manager (SM) is a low-level system function which runs on a
> System
> +Control Processor (SCP) to support isolation and management of power
> domains,
> +clocks, resets, sensors, pins, etc. on complex application processors. It often
> +runs on a Cortex-M processor and provides an abstraction to many of the
> +underlying features of the hardware. The primary purpose of the SM is to
> allow
> +isolation between software running on different cores in the SoC. It does this
> +by having exclusive access to critical resources such as those controlling
> +power, clocks, reset, PMIC, etc. and then providing an RPC interface to those
> +clients. This allows the SM to provide access control, arbitration, and
> +aggregation policies for those shared critical resources.
> +
> +This document covers all the information necessary to understand, maintain,
> +port, and deploy the SM on supported processors.
> +
> +The SM implements an interface compliant with the Arm SCMI 3.2
> Specification
> +with vendor specific extensions.
> +
> +SCMI_BBM: System Control and Management Interface Driver (BBM)
> +==============================================================
> +
> +This protocol is intended provide access to the battery-backed module. This
> +contains persistent storage (GPR), an RTC, and the ON/OFF button. The
> protocol
> +can also provide access to similar functions implemented via external board
> +components. The BBM protocol provides functions to:
> +
> +- Describe the protocol version.
> +- Discover implementation attributes.
> +- Read/write GPR
> +- Discover the RTCs available in the system.
> +- Read/write the RTC time in seconds and ticks
> +- Set an alarm (per LM) in seconds
> +- Get notifications on RTC update, alarm, or rollover.
> +- Get notification on ON/OFF button activity.
> +
> +For most SoC, there is one on-chip RTC (e.g. in BBNSM) and this is RTC ID 0.
> +Board code can add additional GPR and RTC.
> +
> +GPR are not aggregated. The RTC time is also not aggregated. Setting these
> +sets for all so normally exclusive access would be granted to one agent for
> +each. However, RTC alarms are maintained for each LM and the hardware is
> +programmed with the next nearest alarm time. So only one agent in an LM
> should
> +be given access rights to set an RTC alarm.
> +
> +Commands:
> +_________
> +
> +PROTOCOL_VERSION
> +~~~~~~~~~~~~~~~~
> +
> +message_id: 0x0
> +protocol_id: 0x81
> +
> ++---------------+--------------------------------------------------------------+
> +|Return values                                                                 |
> ++---------------+--------------------------------------------------------------+
> +|Name           |Description                                                   |
> ++---------------+--------------------------------------------------------------+
> +|int32 status   | See ARM SCMI Specification v3.2 section 4.1.4 for status
> |
> +|               | code definitions.                                            |
> ++---------------+--------------------------------------------------------------+
> +|uint32 version | For this revision of the specification, this value must be   |
> +|               | 0x10000.                                                     |
> ++---------------+--------------------------------------------------------------+
> +
> +PROTOCOL_ATTRIBUTES
> +~~~~~~~~~~~~~~~~~~~
> +
> +message_id: 0x1
> +protocol_id: 0x81
> +
> ++---------------+--------------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      | See ARM SCMI Specification v3.2 section 4.1.4 for status
> |
> +|                  | code definitions.                                         |
> ++------------------+-----------------------------------------------------------+
> +|uint32 attributes | Bits[31:8] Number of RTCs.                                |
> +|                  | Bits[15:0] Number of persistent storage (GPR) words.      |
> ++------------------+-----------------------------------------------------------+
> +
> +PROTOCOL_MESSAGE_ATTRIBUTES
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +message_id: 0x2
> +protocol_id: 0x81
> +
> ++---------------+--------------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: in case the message is implemented and
> available  |
> +|                  |to use.                                                    |
> +|                  |NOT_FOUND: if the message identified by message_id is      |
> +|                  |invalid or not implemented                                 |
> ++------------------+-----------------------------------------------------------+
> +|uint32 attributes |Flags that are associated with a specific function in the  |
> +|                  |protocol. For all functions in this protocol, this         |
> +|                  |parameter has a value of 0                                 |
> ++------------------+-----------------------------------------------------------+
> +
> +BBM_GPR_SET
> +~~~~~~~~~~~
> +
> +message_id: 0x3
> +protocol_id: 0x81
> +
> ++------------------+-----------------------------------------------------------+
> +|Parameters                                                                    |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|uint32 index      |Index of GPR to write                                      |
> ++------------------+-----------------------------------------------------------+
> +|uint32 value      |32-bit value to write to the GPR                           |
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: if the GPR was successfully written.              |
> +|                  |NOT_FOUND: if the index is not valid.                      |
> +|                  |DENIED: if the agent does not have permission to write     |
> +|                  |the specified GPR                                          |
> ++------------------+-----------------------------------------------------------+
> +
> +BBM_GPR_GET
> +~~~~~~~~~~~
> +
> +message_id: 0x4
> +protocol_id: 0x81
> +
> ++------------------+-----------------------------------------------------------+
> +|Parameters                                                                    |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|uint32 index      |Index of GPR to read                                       |
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: if the GPR was successfully written.              |
> +|                  |NOT_FOUND: if the index is not valid.                      |
> +|                  |DENIED: if the agent does not have permission to write     |
> +|                  |the specified GPR.                                         |
> ++------------------+-----------------------------------------------------------+
> +|uint32 value      |32-bit value read from the GPR                             |
> ++------------------+-----------------------------------------------------------+
> +
> +BBM_RTC_ATTRIBUTES
> +~~~~~~~~~~~~~~~~~~
> +
> +message_id: 0x5
> +protocol_id: 0x81
> +
> ++------------------+-----------------------------------------------------------+
> +|Parameters                                                                    |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|uint32 index      |Index of RTC                                               |
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: returned the attributes.                          |
> +|                  |NOT_FOUND: Index is invalid.                               |
> ++------------------+-----------------------------------------------------------+
> +|uint32 attributes |Bit[31:24] Bit width of RTC seconds.                       |
> +|                  |Bit[23:16] Bit width of RTC ticks.                         |
> +|                  |Bits[15:0] RTC ticks per second                            |
> ++------------------+-----------------------------------------------------------+
> +|uint8 name[16]    |Null-terminated ASCII string of up to 16 bytes in length
> |
> +|                  |describing the RTC name                                    |
> ++------------------+-----------------------------------------------------------+
> +
> +BBM_RTC_TIME_SET
> +~~~~~~~~~~~~~~~~
> +
> +message_id: 0x6
> +protocol_id: 0x81
> +
> ++------------------+-----------------------------------------------------------+
> +|Parameters                                                                    |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|uint32 index      |Index of RTC                                               |
> ++------------------+-----------------------------------------------------------+
> +|uint32 flags      |Bits[31:1] Reserved, must be zero.                         |
> +|                  |Bit[0] RTC time format:                                    |
> +|                  |Set to 1 if the time is in ticks.                          |
> +|                  |Set to 0 if the time is in seconds                         |
> ++------------------+-----------------------------------------------------------+
> +|uint32 time[2]    |Lower word: Lower 32 bits of the time in seconds/ticks.
> |
> +|                  |Upper word: Upper 32 bits of the time in seconds/ticks.    |
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: RTC time was successfully set.                    |
> +|                  |NOT_FOUND: rtcId pertains to a non-existent RTC.           |
> +|                  |INVALID_PARAMETERS: time is not valid                      |
> +|                  |(beyond the range of the RTC).                             |
> +|                  |DENIED: the agent does not have permission to set the RTC. |
> ++------------------+-----------------------------------------------------------+
> +
> +BBM_RTC_TIME_GET
> +~~~~~~~~~~~~~~~~
> +
> +message_id: 0x7
> +protocol_id: 0x81
> +
> ++------------------+-----------------------------------------------------------+
> +|Parameters                                                                    |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|uint32 index      |Index of RTC                                               |
> ++------------------+-----------------------------------------------------------+
> +|uint32 flags      |Bits[31:1] Reserved, must be zero.                         |
> +|                  |Bit[0] RTC time format:                                    |
> +|                  |Set to 1 if the time is in ticks.                          |
> +|                  |Set to 0 if the time is in seconds                         |
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: RTC time was successfully set.                    |
> +|                  |NOT_FOUND: rtcId pertains to a non-existent RTC.           |
> ++------------------+-----------------------------------------------------------+
> +|uint32 time[2]    |Lower word: Lower 32 bits of the time in seconds/ticks.
> |
> +|                  |Upper word: Upper 32 bits of the time in seconds/ticks.    |
> ++------------------+-----------------------------------------------------------+
> +
> +BBM_RTC_ALARM_SET
> +~~~~~~~~~~~~~~~~~
> +
> +message_id: 0x8
> +protocol_id: 0x81
> +
> ++------------------+-----------------------------------------------------------+
> +|Parameters                                                                    |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|uint32 index      |Index of RTC                                               |
> ++------------------+-----------------------------------------------------------+
> +|uint32 flags      |Bits[31:1] Reserved, must be zero.                         |
> +|                  |Bit[0] RTC enable flag:                                    |
> +|                  |Set to 1 if the RTC alarm should be enabled.               |
> +|                  |Set to 0 if the RTC alarm should be disabled               |
> ++------------------+-----------------------------------------------------------+
> +|uint32 time[2]    |Lower word: Lower 32 bits of the time in seconds.          |
> +|                  |Upper word: Upper 32 bits of the time in seconds.          |
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: RTC time was successfully set.                    |
> +|                  |NOT_FOUND: rtcId pertains to a non-existent RTC.           |
> +|                  |INVALID_PARAMETERS: time is not valid                      |
> +|                  |(beyond the range of the RTC).                             |
> +|                  |DENIED: the agent does not have permission to set the RTC  |
> +|                  |alarm                                                      |
> ++------------------+-----------------------------------------------------------+
> +
> +BBM_BUTTON_GET
> +~~~~~~~~~~~~~~
> +
> +message_id: 0x9
> +protocol_id: 0x81
> +
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: if the button status was read.                    |
> +|                  |Other value: ARM SCMI Specification v3.2 section 4.1.4.    |
> ++------------------+-----------------------------------------------------------+
> +|uint32 state      |State of the ON/OFF button                                 |
> ++------------------+-----------------------------------------------------------+
> +
> +BBM_RTC_NOTIFY
> +~~~~~~~~~~~~~~
> +
> +message_id: 0xA
> +protocol_id: 0x81
> +
> ++------------------+-----------------------------------------------------------+
> +|Parameters                                                                    |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|uint32 index      |Index of RTC                                               |
> ++------------------+-----------------------------------------------------------+
> +|uint32 flags      |Notification flags                                         |
> +|                  |Bits[31:3] Reserved, must be zero.                         |
> +|                  |Bit[2] Update enable:                                      |
> +|                  |Set to 1 to send notification.                             |
> +|                  |Set to 0 if no notification.                               |
> +|                  |Bit[1] Rollover enable:                                    |
> +|                  |Set to 1 to send notification.                             |
> +|                  |Set to 0 if no notification.                               |
> +|                  |Bit[0] Alarm enable:                                       |
> +|                  |Set to 1 to send notification.                             |
> +|                  |Set to 0 if no notification                                |
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: notification configuration was successfully       |
> +|                  |updated.                                                   |
> +|                  |NOT_FOUND: rtcId pertains to a non-existent RTC.           |
> +|                  |DENIED: the agent does not have permission to request RTC  |
> +|                  |notifications.                                             |
> ++------------------+-----------------------------------------------------------+
> +
> +BBM_BUTTON_NOTIFY
> +~~~~~~~~~~~~~~~~~
> +
> +message_id: 0xB
> +protocol_id: 0x81
> +
> ++------------------+-----------------------------------------------------------+
> +|Parameters                                                                    |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|uint32 flags      |Notification flags                                         |
> +|                  |Bits[31:1] Reserved, must be zero.                         |
> +|                  |Bit[0] Enable button:                                      |
> +|                  |Set to 1 to send notification.                             |
> +|                  |Set to 0 if no notification                                |
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: notification configuration was successfully       |
> +|                  |updated.                                                   |
> +|                  |DENIED: the agent does not have permission to request      |
> +|                  |button notifications.                                      |
> ++------------------+-----------------------------------------------------------+
> +
> +NEGOTIATE_PROTOCOL_VERSION
> +~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +message_id: 0x10
> +protocol_id: 0x81
> +
> ++--------------------+---------------------------------------------------------+
> +|Parameters                                                                    |
> ++--------------------+---------------------------------------------------------+
> +|Name                |Description                                              |
> ++--------------------+---------------------------------------------------------+
> +|uint32 version      |The negotiated protocol version the agent intends to
> use |
> ++--------------------+---------------------------------------------------------+
> +|Return values                                                                 |
> ++--------------------+---------------------------------------------------------+
> +|Name                |Description                                              |
> ++--------------------+---------------------------------------------------------+
> +|int32 status        |SUCCESS: if the negotiated protocol version is supported
> |
> +|                    |by the platform. All commands, responses, and            |
> +|                    |notifications post successful return of this command must|
> +|                    |comply with the negotiated version.                      |
> +|                    |NOT_SUPPORTED: if the protocol version is not supported. |
> ++--------------------+---------------------------------------------------------+
> +
> +Notifications
> +_____________
> +
> +BBM_RTC_EVENT
> +~~~~~~~~~~~~~
> +
> +message_id: 0x0
> +protocol_id: 0x81
> +
> ++------------------+-----------------------------------------------------------+
> +|Parameters                                                                    |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|uint32 flags      |RTC events:                                                |
> +|                  |Bits[31:2] Reserved, must be zero.                         |
> +|                  |Bit[1] RTC rollover notification:                          |
> +|                  |1 RTC rollover detected.                                   |
> +|                  |0 no RTC rollover detected.                                |
> +|                  |Bit[0] RTC alarm notification:                             |
> +|                  |1 RTC alarm generated.                                     |
> +|                  |0 no RTC alarm generated.                                  |
> ++------------------+-----------------------------------------------------------+
> +
> +BBM_BUTTON_EVENT
> +~~~~~~~~~~~~~~~~
> +
> +message_id: 0x1
> +protocol_id: 0x81
> +
> ++------------------+-----------------------------------------------------------+
> +|Parameters                                                                    |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|uint32 flags      |RTC events:                                                |
> ++------------------+-----------------------------------------------------------+
> +|                  |Button events:                                             |
> +|                  |Bits[31:1] Reserved, must be zero.                         |
> +|                  |Bit[0] Button notification:                                |
> +|                  |1 button change detected.                                  |
> +|                  |0 no button change detected.                               |
> ++------------------+-----------------------------------------------------------+
> +
> +SCMI_MISC: System Control and Management Interface Driver (MISC)
> +================================================================
> +
> +Provides misc. functions. This includes controls that are misc.
> settings/actions
> +that must be exposed from the SM to agents. They are device specific and
> are
> +usually define to access bit fields in various mix block control modules,
> +IOMUX_GPR, and other GPR/CSR owned by the SM. This protocol supports
> the
> +following functions:
> +
> +- Describe the protocol version.
> +- Discover implementation attributes.
> +- Set/Get a control.
> +- Initiate an action on a control.
> +- Obtain platform (i.e. SM) build information.
> +- Obtain ROM passover data.
> +- Read boot/shutdown/reset information for the LM or the system.
> +
> +Commands:
> +_________
> +
> +PROTOCOL_VERSION
> +~~~~~~~~~~~~~~~~
> +
> +message_id: 0x0
> +protocol_id: 0x84
> +
> ++---------------+--------------------------------------------------------------+
> +|Return values                                                                 |
> ++---------------+--------------------------------------------------------------+
> +|Name           |Description                                                   |
> ++---------------+--------------------------------------------------------------+
> +|int32 status   | See ARM SCMI Specification v3.2 section 4.1.4 for status
> |
> +|               | code definitions.                                            |
> ++---------------+--------------------------------------------------------------+
> +|uint32 version | For this revision of the specification, this value must be   |
> +|               | 0x10000.                                                     |
> ++---------------+--------------------------------------------------------------+
> +
> +PROTOCOL_ATTRIBUTES
> +~~~~~~~~~~~~~~~~~~~
> +
> +message_id: 0x1
> +protocol_id: 0x84
> +
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |See ARM SCMI Specification v3.2 section 4.1.4 for status
> |
> +|                  |code definitions.                                          |
> ++------------------+-----------------------------------------------------------+
> +|uint32 attributes |Protocol attributes:                                       |
> +|                  |Bits[31:24] Reserved, must be zero.                        |
> +|                  |Bits[23:16] Number of reasons.                             |
> +|                  |Bits[15:0] Number of controls                              |
> ++------------------+-----------------------------------------------------------+
> +
> +PROTOCOL_MESSAGE_ATTRIBUTES
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +message_id: 0x2
> +protocol_id: 0x84
> +
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: in case the message is implemented and
> available  |
> +|                  |to use.                                                    |
> +|                  |NOT_FOUND: if the message identified by message_id is      |
> +|                  |invalid or not implemented                                 |
> ++------------------+-----------------------------------------------------------+
> +|uint32 attributes |Flags that are associated with a specific function in the  |
> +|                  |protocol. For all functions in this protocol, this         |
> +|                  |parameter has a value of 0                                 |
> ++------------------+-----------------------------------------------------------+
> +
> +MISC_CONTROL_SET
> +~~~~~~~~~~~~~~~~
> +
> +message_id: 0x3
> +protocol_id: 0x84
> +
> ++------------------+-----------------------------------------------------------+
> +|Parameters                                                                    |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|uint32 index      |Index of the control                                       |
> ++------------------+-----------------------------------------------------------+
> +|uint32 num        |Size of the value data in words                            |
> ++------------------+-----------------------------------------------------------+
> +|uint32 val[8]     |value data array                                           |
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: if the control was set successfully.              |
> +|                  |NOT_FOUND: if the index is not valid.                      |
> +|                  |DENIED: if the agent does not have permission to set the   |
> +|                  |control                                                    |
> ++------------------+-----------------------------------------------------------+
> +
> +MISC_CONTROL_GET
> +~~~~~~~~~~~~~~~~
> +
> +message_id: 0x4
> +protocol_id: 0x84
> +
> ++------------------+-----------------------------------------------------------+
> +|Parameters                                                                    |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|uint32 index      |Index of the control                                       |
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: if the control was set successfully.              |
> +|                  |NOT_FOUND: if the index is not valid.                      |
> +|                  |DENIED: if the agent does not have permission to get the   |
> +|                  |control                                                    |
> ++------------------+-----------------------------------------------------------+
> +|uint32 num        |Size of the return data in words                           |
> ++------------------+-----------------------------------------------------------+
> +|uint32 val[8]     |value data array                                           |
> ++------------------+-----------------------------------------------------------+
> +
> +MISC_CONTROL_ACTION
> +~~~~~~~~~~~~~~~~~~~
> +
> +message_id: 0x5
> +protocol_id: 0x84
> +
> ++------------------+-----------------------------------------------------------+
> +|Parameters                                                                    |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|uint32 index      |Index of the control                                       |
> ++------------------+-----------------------------------------------------------+
> +|uint32 action	   |Action for the control                                     |
> ++------------------+-----------------------------------------------------------+
> +|uint32 numarg	   |Size of the argument data                                  |
> ++------------------+-----------------------------------------------------------+
> +|uint32 arg[8]	   |Argument data array                                        |
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: if the action was set successfully.               |
> +|                  |NOT_FOUND: if the index is not valid.                      |
> +|                  |DENIED: if the agent does not have permission to get the   |
> +|                  |control                                                    |
> ++------------------+-----------------------------------------------------------+
> +|uint32 num        |Size of the return data in words                           |
> ++------------------+-----------------------------------------------------------+
> +|uint32 val[8]     |value data array                                           |
> ++------------------+-----------------------------------------------------------+
> +
> +MISC_DISCOVER_BUILD_INFO
> +~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +message_id: 0x6
> +protocol_id: 0x84
> +
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: if the build info was got successfully.           |
> +|                  |NOT_SUPPORTED: if the data is not available.               |
> ++------------------+-----------------------------------------------------------+
> +|uint32 buildnum   |Build number                                               |
> ++------------------+-----------------------------------------------------------+
> +|uint32 buildcommit|Most significant 32 bits of the git commit hash
> |
> ++------------------+-----------------------------------------------------------+
> +|uint8 date[16]    |Date of build. Null terminated ASCII string of up to 16    |
> +|                  |bytes in length                                            |
> ++------------------+-----------------------------------------------------------+
> +|uint8 time[16]    |Time of build. Null terminated ASCII string of up to 16    |
> +|                  |bytes in length                                            |
> ++------------------+-----------------------------------------------------------+
> +
> +MISC_ROM_PASSOVER_GET
> +~~~~~~~~~~~~~~~~~~~~~
> +
> +This function is used to obtain the ROM passover data. The returned block of
> +words is structured as defined in the ROM passover section in the SoC RM.
> +
> +message_id: 0x7
> +protocol_id: 0x84
> +
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: if the data was got successfully.                 |
> +|                  |NOT_SUPPORTED: if the data is not available.               |
> ++------------------+-----------------------------------------------------------+
> +|uint32 num        |Size of the passover data in words                         |
> ++------------------+-----------------------------------------------------------+
> +|uint32_t data[8]  |Passover data array                                        |
> ++------------------+-----------------------------------------------------------+
> +
> +MISC_CONTROL_NOTIFY
> +~~~~~~~~~~~~~~~~~~~
> +
> +message_id: 0x8
> +protocol_id: 0x84
> +
> ++------------------+-----------------------------------------------------------+
> +|Parameters                                                                    |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|uint32 index      |Index of control                                           |
> ++------------------+-----------------------------------------------------------+
> +|uint32 flags      |Notification flags, varies by control                      |
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: notification configuration was successfully       |
> +|                  |updated.                                                   |
> +|                  |NOT_FOUND: control id not exists.                          |
> +|                  |INVALID_PARAMETERS: if the input attributes flag specifies |
> +|                  |unsupported or invalid configurations..                    |
> +|                  |DENIED: if the calling agent is not permitted to request   |
> +|                  |the notification.                                          |
> ++------------------+-----------------------------------------------------------+
> +
> +MISC_REASON_ATTRIBUTES
> +~~~~~~~~~~~~~~~~~~~~~~
> +
> +message_id: 0x9
> +protocol_id: 0x84
> +
> ++------------------+-----------------------------------------------------------+
> +|Parameters                                                                    |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|uint32 reasonid   |Identifier for the reason                                  |
> ++------------------+-----------------------------------------------------------+
> +|Return values                                                                 |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|int32 status      |SUCCESS: if valid reason attributes are returned           |
> +|                  |NOT_FOUND: if reasonId pertains to a non-existent reason.  |
> ++------------------+-----------------------------------------------------------+
> +|uint32 attributes |Reason attributes. This parameter has the following
> |
> +|                  |format: Bits[31:0] Reserved, must be zero                  |
> +|                  |Bits[15:0] Number of persistent storage (GPR) words.       |
> ++------------------+-----------------------------------------------------------+
> +|uint8 name[16]    |Null-terminated ASCII string of up to 16 bytes in length
> |
> +|                  |describing the reason                                      |
> ++------------------+-----------------------------------------------------------+
> +
> +MISC_RESET_REASON
> +~~~~~~~~~~~~~~~~~
> +
> +message_id: 0xA
> +protocol_id: 0x84
> +
> ++--------------------+---------------------------------------------------------+
> +|Parameters                                                                    |
> ++--------------------+---------------------------------------------------------+
> +|Name                |Description                                              |
> ++--------------------+---------------------------------------------------------+
> +|uint32 flags        |Reason flags. This parameter has the following format:   |
> +|                    |Bits[31:1] Reserved, must be zero.                       |
> +|                    |Bit[0] System:                                           |
> +|                    |Set to 1 to return the system reason.                    |
> +|                    |Set to 0 to return the LM reason                         |
> ++--------------------+---------------------------------------------------------+
> +|Return values                                                                 |
> ++--------------------+---------------------------------------------------------+
> +|Name                |Description                                              |
> ++--------------------+---------------------------------------------------------+
> +|int32 status        |SUCCESS: reset reason return                             |
> ++--------------------+---------------------------------------------------------+
> +|uint32 bootflags    |Boot reason flags. This parameter has the format:        |
> +|                    |Bits[31] Valid.                                          |
> +|                    |Set to 1 if the entire reason is valid.                  |
> +|                    |Set to 0 if the entire reason is not valid.              |
> +|                    |Bits[30:29] Reserved, must be zero.                      |
> +|                    |Bit[28] Valid origin:                                    |
> +|                    |Set to 1 if the origin field is valid.                   |
> +|                    |Set to 0 if the origin field is not valid.               |
> +|                    |Bits[27:24] Origin.                                      |
> +|                    |Bit[23] Valid err ID:                                    |
> +|                    |Set to 1 if the error ID field is valid.                 |
> +|                    |Set to 0 if the error ID field is not valid.             |
> +|                    |Bits[22:8] Error ID.                                     |
> +|                    |Bit[7:0] Reason                                          |
> ++--------------------+---------------------------------------------------------+
> +|uint32 shutdownflags|Shutdown reason flags. This parameter has the
> format:    |
> +|                    |Bits[31] Valid.                                          |
> +|                    |Set to 1 if the entire reason is valid.                  |
> +|                    |Set to 0 if the entire reason is not valid.              |
> +|                    |Bits[30:29] Number of valid extended info words.         |
> +|                    |Bit[28] Valid origin:                                    |
> +|                    |Set to 1 if the origin field is valid.                   |
> +|                    |Set to 0 if the origin field is not valid.               |
> +|                    |Bits[27:24] Origin.                                      |
> +|                    |Bit[23] Valid err ID:                                    |
> +|                    |Set to 1 if the error ID field is valid.                 |
> +|                    |Set to 0 if the error ID field is not valid.             |
> +|                    |Bits[22:8] Error ID.                                     |
> +|                    |Bit[7:0] Reason                                          |
> ++--------------------+---------------------------------------------------------+
> +|uint32 extinfo[8]   |Array of extended info words                             |
> ++--------------------+---------------------------------------------------------+
> +
> +MISC_SI_INFO
> +~~~~~~~~~~~~
> +
> +message_id: 0xB
> +protocol_id: 0x84
> +
> ++--------------------+---------------------------------------------------------+
> +|Return values                                                                 |
> ++--------------------+---------------------------------------------------------+
> +|Name                |Description                                              |
> ++--------------------+---------------------------------------------------------+
> +|int32 status        |SUCCESS: silicon info return                             |
> ++--------------------+---------------------------------------------------------+
> +|uint32 deviceid     |Silicon specific device ID                               |
> ++--------------------+---------------------------------------------------------+
> +|uint32 sirev        |Silicon specific revision                                |
> ++--------------------+---------------------------------------------------------+
> +|uint32 partnum      |Silicon specific part number                             |
> ++--------------------+---------------------------------------------------------+
> +|uint8 siname[16]    |Silicon name/revision. Null terminated ASCII string of
> up|
> +|                    |to 16 bytes in length                                    |
> ++--------------------+---------------------------------------------------------+
> +
> +MISC_CFG_INFO
> +~~~~~~~~~~~~~
> +
> +message_id: 0xC
> +protocol_id: 0x84
> +
> ++--------------------+---------------------------------------------------------+
> +|Return values                                                                 |
> ++--------------------+---------------------------------------------------------+
> +|Name                |Description                                              |
> ++--------------------+---------------------------------------------------------+
> +|int32 status        |SUCCESS: config name return                              |
> +|                    |NOT_SUPPORTED: name not available                        |
> ++--------------------+---------------------------------------------------------+
> +|uint32 msel         |Mode selector value                                      |
> ++--------------------+---------------------------------------------------------+
> +|uint8 cfgname[16]   |config file basename. Null terminated ASCII string of
> up |
> +|                    |to 16 bytes in length                                    |
> ++--------------------+---------------------------------------------------------+
> +
> +MISC_SYSLOG
> +~~~~~~~~~~~
> +
> +message_id: 0xD
> +protocol_id: 0x84
> +
> ++--------------------+---------------------------------------------------------+
> +|Parameters                                                                    |
> ++--------------------+---------------------------------------------------------+
> +|Name                |Description                                              |
> ++--------------------+---------------------------------------------------------+
> +|uint32 flags        |Device specific flags that might impact the data returned|
> +|                    |or clearing of the data                                  |
> ++--------------------+---------------------------------------------------------+
> +|uint32 logindex     |Index to the first log word. Will be the first element in|
> +|                    |the return array                                         |
> ++--------------------+---------------------------------------------------------+
> +|Return values                                                                 |
> ++--------------------+---------------------------------------------------------+
> +|Name                |Description                                              |
> ++--------------------+---------------------------------------------------------+
> +|int32 status        |SUCCESS: reset reason return                             |
> ++--------------------+---------------------------------------------------------+
> +|uint32 numLogflags  |Descriptor for the log data returned by this call.       |
> +|                    |Bits[31:20] Number of remaining log words.               |
> +|                    |Bits[15:12] Reserved, must be zero.                      |
> +|                    |Bits[11:0] Number of log words that are returned by this |
> +|                    |call                                                     |
> ++--------------------+---------------------------------------------------------+
> +|uint32 syslog[16]   |Log data array                                           |
> ++--------------------+---------------------------------------------------------+
> +
> +NEGOTIATE_PROTOCOL_VERSION
> +~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +message_id: 0x10
> +protocol_id: 0x84
> +
> ++--------------------+---------------------------------------------------------+
> +|Parameters                                                                    |
> ++--------------------+---------------------------------------------------------+
> +|Name                |Description                                              |
> ++--------------------+---------------------------------------------------------+
> +|uint32 version      |The negotiated protocol version the agent intends to
> use |
> ++--------------------+---------------------------------------------------------+
> +|Return values                                                                 |
> ++--------------------+---------------------------------------------------------+
> +|Name                |Description                                              |
> ++--------------------+---------------------------------------------------------+
> +|int32 status        |SUCCESS: if the negotiated protocol version is supported
> |
> +|                    |by the platform. All commands, responses, and            |
> +|                    |notifications post successful return of this command must|
> +|                    |comply with the negotiated version.                      |
> +|                    |NOT_SUPPORTED: if the protocol version is not supported. |
> ++--------------------+---------------------------------------------------------+
> +
> +Notifications
> +_____________
> +
> +MISC_CONTROL_EVENT
> +~~~~~~~~~~~~~~~~~~
> +
> +message_id: 0x0
> +protocol_id: 0x81
> +
> ++------------------+-----------------------------------------------------------+
> +|Parameters                                                                    |
> ++------------------+-----------------------------------------------------------+
> +|Name              |Description                                                |
> ++------------------+-----------------------------------------------------------+
> +|uint32 ctrlid     |Identifier for the control that caused the event.          |
> ++------------------+-----------------------------------------------------------+
> +|uint32 flags      |Event flags, varies by control.                            |
> ++------------------+-----------------------------------------------------------+
> +
> diff --git a/Documentation/firmware-guide/nxp/index.rst
> b/Documentation/firmware-guide/nxp/index.rst
> new file mode 100644
> index 000000000000..b38c980a50c6
> --- /dev/null
> +++ b/Documentation/firmware-guide/nxp/index.rst
> @@ -0,0 +1,10 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +====================
> +NXP Firmware Support
> +====================
> +
> +.. toctree::
> +   :maxdepth: 1
> +
> +   imx95-scmi
> 
> --
> 2.37.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux