On Mon, 22 Apr 2024 16:07:31 -0700, Florian Fainelli wrote: > Describe the Ethernet LEDs for the Raspberry Pi 4 model B board as well > as the Raspberry Pi 4 CM board. The Raspberry Pi 400 board does not > include RJ45 connector LEDs so the 'leds' node is deleted accordingly. > > Signed-off-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx> > --- > Changes in v2: > > - added "function = LED_FUNCTION_LAN" > > .../arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 20 +++++++++++++++++ > .../arm/boot/dts/broadcom/bcm2711-rpi-400.dts | 1 + > .../boot/dts/broadcom/bcm2711-rpi-cm4-io.dts | 22 +++++++++++++++++++ > 3 files changed, 43 insertions(+) > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y broadcom/bcm2711-rpi-4-b.dtb broadcom/bcm2711-rpi-400.dtb broadcom/bcm2711-rpi-cm4-io.dtb' for 20240422230733.1284055-1-florian.fainelli@xxxxxxxxxxxx: arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dtb: ethernet-phy@0: leds: 'leds@1', 'leds@2' do not match any of the regexes: '^led@[a-f0-9]+$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/net/ethernet-phy.yaml# arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dtb: ethernet-phy@1: leds: 'leds@0', 'leds@1' do not match any of the regexes: '^led@[a-f0-9]+$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/net/ethernet-phy.yaml# arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dtb: ethernet-phy@1: leds: 'leds@0', 'leds@1' do not match any of the regexes: '^led@[a-f0-9]+$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
