The bootloader adds MTD partitions in this subnode if present, or in the
spi-nor node itself otherwise.
Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml.
Fix all this by adding an empty partitions node which the bootloader will
fill with configured MTD partitions. Remove the deprecated properties
as well.
Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
index 5ca6b22525469..01e5092e4c40a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
@@ -251,11 +251,15 @@ &qspi0 {
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
spi-max-frequency = <84000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
};
};
--
2.34.1
