Add audio nodes for imx8dxl-evk boards. Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 231 ++++++++++++++++++++++++++ 1 file changed, 231 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts index 2123d431e0613..5b5a7b47217c3 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -125,6 +125,78 @@ mii_select: regulator-4 { enable-active-high; regulator-always-on; }; + + bt_sco_codec: audio-codec-bt { + compatible = "linux,bt-sco"; + #sound-dai-cells = <1>; + }; + + sound-bt-sco { + compatible = "simple-audio-card"; + simple-audio-card,name = "bt-sco-audio"; + simple-audio-card,format = "dsp_a"; + simple-audio-card,bitclock-inversion; + simple-audio-card,frame-master = <&btcpu>; + simple-audio-card,bitclock-master = <&btcpu>; + + btcpu: simple-audio-card,cpu { + sound-dai = <&sai0>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + + simple-audio-card,codec { + sound-dai = <&bt_sco_codec 1>; + }; + }; + + sound-wm8960-1 { + compatible = "fsl,imx7d-evk-wm8960", "fsl,imx-audio-wm8960"; + model = "wm8960-audio"; + audio-cpu = <&sai1>; + audio-codec = <&wm8960_1>; + audio-asrc = <&asrc0>; + audio-routing = "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT1", "Mic Jack", + "Mic Jack", "MICB"; + }; + + sound-wm8960-2 { + compatible = "fsl,imx7d-evk-wm8960", "fsl,imx-audio-wm8960"; + model = "wm8960-audio-2"; + audio-cpu = <&sai2>; + audio-codec = <&wm8960_2>; + audio-routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT1", "Mic Jack", + "Mic Jack", "MICB"; + }; + + sound-wm8960-3 { + compatible = "fsl,imx7d-evk-wm8960", "fsl,imx-audio-wm8960"; + model = "wm8960-audio-3"; + audio-cpu = <&sai3>; + audio-codec = <&wm8960_3>; + audio-routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT1", "Mic Jack", + "Mic Jack", "MICB"; + }; }; &adc0 { @@ -132,6 +204,11 @@ &adc0 { status = "okay"; }; +&asrc0 { + fsl,asrc-rate = <48000>; + status = "okay"; +}; + &eqos { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_eqos>; @@ -259,6 +336,78 @@ max7322: gpio@68 { }; }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + wm8960_1: audio-codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>; + clock-names = "mclk"; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout1_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, + <49152000>, + <12288000>, + <12288000>; + wlf,shared-lrclk; + wlf,hp-cfg = <2 2 3>; + wlf,gpio-cfg = <1 3>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + wm8960_2: audio-codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>; + clock-names = "mclk"; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout1_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, + <49152000>, + <12288000>, + <12288000>; + wlf,shared-lrclk; + wlf,hp-cfg = <2 2 3>; + wlf,gpio-cfg = <1 3>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + wm8960_3: audio-codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>; + clock-names = "mclk"; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout1_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, + <49152000>, + <12288000>, + <12288000>; + wlf,shared-lrclk; + wlf,hp-cfg = <2 2 3>; + wlf,gpio-cfg = <1 3>; + }; + }; + i2c@4 { #address-cells = <1>; #size-cells = <0>; @@ -362,6 +511,53 @@ &lsio_gpio5 { status = "okay"; }; +&sai0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai0>; + #sound-dai-cells = <0>; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&sai0_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; + status = "okay"; +}; + +&sai1 { + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&sai1_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + status = "okay"; +}; + +&sai2 { + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&sai2_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + fsl,sai-asynchronous; + status = "okay"; +}; + +&sai3 { + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&sai3_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + fsl,sai-asynchronous; + status = "okay"; +}; + &thermal_zones { pmic-thermal { polling-delay-passive = <250>; @@ -595,6 +791,41 @@ IMX8DXL_UART0_TX_ADMA_UART0_TX 0x06000020 >; }; + pinctrl_sai0: sai0grp { + fsl,pins = < + IMX8DXL_SPI0_CS0_ADMA_SAI0_RXD 0x06000060 + IMX8DXL_SPI0_CS1_ADMA_SAI0_RXC 0x06000040 + IMX8DXL_SPI0_SCK_ADMA_SAI0_TXC 0x06000060 + IMX8DXL_SPI0_SDI_ADMA_SAI0_TXD 0x06000060 + IMX8DXL_SPI0_SDO_ADMA_SAI0_TXFS 0x06000040 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + IMX8DXL_FLEXCAN0_RX_ADMA_SAI1_TXC 0x06000040 + IMX8DXL_FLEXCAN0_TX_ADMA_SAI1_TXFS 0x06000040 + IMX8DXL_FLEXCAN1_RX_ADMA_SAI1_TXD 0x06000060 + IMX8DXL_FLEXCAN1_TX_ADMA_SAI1_RXD 0x06000060 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + IMX8DXL_SNVS_TAMPER_OUT3_ADMA_SAI2_RXC 0x06000040 + IMX8DXL_SNVS_TAMPER_IN0_ADMA_SAI2_RXFS 0x06000040 + IMX8DXL_SNVS_TAMPER_OUT4_ADMA_SAI2_RXD 0x06000060 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + IMX8DXL_SNVS_TAMPER_IN1_ADMA_SAI3_RXC 0x06000040 + IMX8DXL_SNVS_TAMPER_IN3_ADMA_SAI3_RXFS 0x06000040 + IMX8DXL_SNVS_TAMPER_IN2_ADMA_SAI3_RXD 0x06000060 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 -- 2.34.1