Add another mux option for SPI3 pins, this is used on
DH electronics STM32MP13xx DHCOR DHSBC board.
Signed-off-by: Marek Vasut <marex@xxxxxxx>
---
Cc: "Leonard Göhrs" <l.goehrs@xxxxxxxxxxxxxx>
Cc: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
Cc: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx>
Cc: Andre Przywara <andre.przywara@xxxxxxx>
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: Sean Nyekjaer <sean@xxxxxxxxxx>
Cc: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: kernel@xxxxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
---
arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 23 +++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
index 17acd2850d381..7abd227e69f4b 100644
--- a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
@@ -534,6 +534,29 @@ pins {
};
};
+ spi3_pins_a: spi3-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('H', 13, AF6)>, /* SPI3_SCK */
+ <STM32_PINMUX('F', 1, AF5)>; /* SPI3_MOSI */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 4, AF5)>; /* SPI3_MISO */
+ bias-disable;
+ };
+ };
+
+ spi3_sleep_pins_a: spi3-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* SPI3_SCK */
+ <STM32_PINMUX('D', 4, ANALOG)>, /* SPI3_MISO */
+ <STM32_PINMUX('F', 1, ANALOG)>; /* SPI3_MOSI */
+ };
+ };
+
spi5_pins_a: spi5-0 {
pins1 {
pinmux = <STM32_PINMUX('H', 7, AF6)>, /* SPI5_SCK */
--
2.43.0
