This patch adds USB nodes for Canaan Kendryte K230 SoCs. The fifo parameters are taken from factory dts [1]. For the clock parameter, we use a dummy node here as we don't know the actual clock this IP connected inside the SoC chip, and it doesn't matter after reviewing the dwc2 driver code, which will not read the clock frequency but only use the binding to turn the clock on or off to save power. [1] https://github.com/kendryte/k230_sdk/blob/v1.5/src/little/linux/arch/riscv/boot/dts/kendryte/k230.dtsi Signed-off-by: Yangyu Chen <cyy@xxxxxxxxxxxx> --- arch/riscv/boot/dts/canaan/k230.dtsi | 29 ++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/riscv/boot/dts/canaan/k230.dtsi b/arch/riscv/boot/dts/canaan/k230.dtsi index 95c1a3d8fb11..2311fb7f7127 100644 --- a/arch/riscv/boot/dts/canaan/k230.dtsi +++ b/arch/riscv/boot/dts/canaan/k230.dtsi @@ -65,6 +65,13 @@ apb_clk: apb-clk-clock { #clock-cells = <0>; }; + clk_dummy: clock-dummy { + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "clk_dummy"; + #clock-cells = <0>; + }; + soc { compatible = "simple-bus"; interrupt-parent = <&plic>; @@ -138,5 +145,27 @@ uart4: serial@91404000 { reg-shift = <2>; status = "disabled"; }; + + usb0: usb@91500000 { + compatible = "canaan,k230-otg", "snps,dwc2"; + reg = <0x0 0x91500000 0x0 0x40000>; + interrupts = <173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_dummy>; + clock-names = "otg"; + g-rx-fifo-size = <512>; + g-np-tx-fifo-size = <64>; + g-tx-fifo-size = <512 1024 64 64 64 64>; + }; + + usb1: usb@91540000 { + compatible = "canaan,k230-otg", "snps,dwc2"; + reg = <0x0 0x91540000 0x0 0x40000>; + interrupts = <174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_dummy>; + clock-names = "otg"; + g-rx-fifo-size = <512>; + g-np-tx-fifo-size = <64>; + g-tx-fifo-size = <512 1024 64 64 64 64>; + }; }; }; -- 2.43.0
