On 2024-04-17 18:29:34, David Wronek wrote:
> Add support for the 2560x1600@90Hz OLED panel by EDO bundled with a
> Raydium RM69380 controller, as found on the Lenovo Xiaoxin Pad Pro 2021.
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Signed-off-by: David Wronek <david@xxxxxxxxxxxxxx>
Reviewed-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/panel/Kconfig | 12 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-raydium-rm69380.c | 344 ++++++++++++++++++++++++++
> 3 files changed, 357 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 154f5bf82980..e2a66c21349f 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -542,6 +542,18 @@ config DRM_PANEL_RAYDIUM_RM692E5
> Say Y here if you want to enable support for Raydium RM692E5-based
> display panels, such as the one found in the Fairphone 5 smartphone.
>
> +config DRM_PANEL_RAYDIUM_RM69380
> + tristate "Raydium RM69380-based DSI panel"
> + depends on OF && GPIOLIB
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here if you want to enable support for Raydium RM69380-based
> + display panels.
> +
> + This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
> + in combination with an EDO OLED panel.
> +
> config DRM_PANEL_RONBO_RB070D30
> tristate "Ronbo Electronics RB070D30 panel"
> depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 24a02655d726..e2a2807d4ef0 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -55,6 +55,7 @@ obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen
> obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM67191) += panel-raydium-rm67191.o
> obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o
> obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM692E5) += panel-raydium-rm692e5.o
> +obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM69380) += panel-raydium-rm69380.o
> obj-$(CONFIG_DRM_PANEL_RONBO_RB070D30) += panel-ronbo-rb070d30.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20) += panel-samsung-atna33xc20.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_DB7430) += panel-samsung-db7430.o
> diff --git a/drivers/gpu/drm/panel/panel-raydium-rm69380.c b/drivers/gpu/drm/panel/panel-raydium-rm69380.c
> new file mode 100644
> index 000000000000..4dca6802faef
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-raydium-rm69380.c
> @@ -0,0 +1,344 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree.
> + * Copyright (c) 2024 David Wronek <david@xxxxxxxxxxxxxx>
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_graph.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_probe_helper.h>
> +
> +struct rm69380_panel {
> + struct drm_panel panel;
> + struct mipi_dsi_device *dsi[2];
> + struct regulator_bulk_data supplies[2];
> + struct gpio_desc *reset_gpio;
> +};
> +
> +static inline
> +struct rm69380_panel *to_rm69380_panel(struct drm_panel *panel)
> +{
> + return container_of(panel, struct rm69380_panel, panel);
> +}
> +
> +static void rm69380_reset(struct rm69380_panel *ctx)
> +{
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + usleep_range(15000, 16000);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + usleep_range(10000, 11000);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + msleep(30);
> +}
> +
> +static int rm69380_on(struct rm69380_panel *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi[0];
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> + if (ctx->dsi[1])
> + ctx->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + mipi_dsi_dcs_write_seq(dsi, 0xfe, 0xd4);
> + mipi_dsi_dcs_write_seq(dsi, 0x00, 0x80);
> + mipi_dsi_dcs_write_seq(dsi, 0xfe, 0xd0);
> + mipi_dsi_dcs_write_seq(dsi, 0x48, 0x00);
> + mipi_dsi_dcs_write_seq(dsi, 0xfe, 0x26);
> + mipi_dsi_dcs_write_seq(dsi, 0x75, 0x3f);
> + mipi_dsi_dcs_write_seq(dsi, 0x1d, 0x1a);
> + mipi_dsi_dcs_write_seq(dsi, 0xfe, 0x00);
> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x28);
> + mipi_dsi_dcs_write_seq(dsi, 0xc2, 0x08);
> +
> + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set tear on: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
> + return ret;
> + }
> + msleep(20);
> +
> + ret = mipi_dsi_dcs_set_display_on(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set display on: %d\n", ret);
> + return ret;
> + }
> + msleep(36);
> +
> + return 0;
> +}
> +
> +static int rm69380_off(struct rm69380_panel *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi[0];
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> + if (ctx->dsi[1])
> + ctx->dsi[1]->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_set_display_off(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set display off: %d\n", ret);
> + return ret;
> + }
> + msleep(35);
> +
> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
> + return ret;
> + }
> + msleep(20);
> +
> + return 0;
> +}
> +
> +static int rm69380_prepare(struct drm_panel *panel)
> +{
> + struct rm69380_panel *ctx = to_rm69380_panel(panel);
> + struct device *dev = &ctx->dsi[0]->dev;
> + int ret;
> +
> + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> + if (ret < 0) {
> + dev_err(dev, "Failed to enable regulators: %d\n", ret);
> + return ret;
> + }
> +
> + rm69380_reset(ctx);
> +
> + ret = rm69380_on(ctx);
> + if (ret < 0) {
> + dev_err(dev, "Failed to initialize panel: %d\n", ret);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int rm69380_unprepare(struct drm_panel *panel)
> +{
> + struct rm69380_panel *ctx = to_rm69380_panel(panel);
> + struct device *dev = &ctx->dsi[0]->dev;
> + int ret;
> +
> + ret = rm69380_off(ctx);
> + if (ret < 0)
> + dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
> +
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode rm69380_mode = {
> + .clock = (2560 + 32 + 12 + 38) * (1600 + 20 + 4 + 8) * 90 / 1000,
> + .hdisplay = 2560,
> + .hsync_start = 2560 + 32,
> + .hsync_end = 2560 + 32 + 12,
> + .htotal = 2560 + 32 + 12 + 38,
> + .vdisplay = 1600,
> + .vsync_start = 1600 + 20,
> + .vsync_end = 1600 + 20 + 4,
> + .vtotal = 1600 + 20 + 4 + 8,
> + .width_mm = 248,
> + .height_mm = 155,
> + .type = DRM_MODE_TYPE_DRIVER,
> +};
> +
> +static int rm69380_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + return drm_connector_helper_get_modes_fixed(connector, &rm69380_mode);
> +}
> +
> +static const struct drm_panel_funcs rm69380_panel_funcs = {
> + .prepare = rm69380_prepare,
> + .unprepare = rm69380_unprepare,
> + .get_modes = rm69380_get_modes,
> +};
> +
> +static int rm69380_bl_update_status(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + u16 brightness = backlight_get_brightness(bl);
> + int ret;
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
> + if (ret < 0)
> + return ret;
> +
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + return 0;
> +}
> +
> +static int rm69380_bl_get_brightness(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + u16 brightness;
> + int ret;
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_get_display_brightness_large(dsi, &brightness);
> + if (ret < 0)
> + return ret;
> +
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + return brightness;
> +}
> +
> +static const struct backlight_ops rm69380_bl_ops = {
> + .update_status = rm69380_bl_update_status,
> + .get_brightness = rm69380_bl_get_brightness,
> +};
> +
> +static struct backlight_device *
> +rm69380_create_backlight(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + const struct backlight_properties props = {
> + .type = BACKLIGHT_RAW,
> + .brightness = 511,
> + .max_brightness = 2047,
> + };
> +
> + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
> + &rm69380_bl_ops, &props);
> +}
> +
> +static int rm69380_probe(struct mipi_dsi_device *dsi)
> +{
> + struct mipi_dsi_host *dsi_sec_host;
> + struct rm69380_panel *ctx;
> + struct device *dev = &dsi->dev;
> + struct device_node *dsi_sec;
> + int ret, i;
> +
> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + ctx->supplies[0].supply = "vddio";
> + ctx->supplies[1].supply = "avdd";
> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
> + ctx->supplies);
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "Failed to get regulators\n");
> +
> + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(ctx->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
> + "Failed to get reset-gpios\n");
> +
> + dsi_sec = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
> +
> + if (dsi_sec) {
> + const struct mipi_dsi_device_info info = { "RM69380 DSI1", 0,
> + dsi_sec };
> +
> + dsi_sec_host = of_find_mipi_dsi_host_by_node(dsi_sec);
> + of_node_put(dsi_sec);
> + if (!dsi_sec_host)
> + return dev_err_probe(dev, -EPROBE_DEFER,
> + "Cannot get secondary DSI host\n");
> +
> + ctx->dsi[1] =
> + devm_mipi_dsi_device_register_full(dev, dsi_sec_host, &info);
> + if (IS_ERR(ctx->dsi[1]))
> + return dev_err_probe(dev, PTR_ERR(ctx->dsi[1]),
> + "Cannot get secondary DSI node\n");
> +
> + mipi_dsi_set_drvdata(ctx->dsi[1], ctx);
> + }
> +
> + ctx->dsi[0] = dsi;
> + mipi_dsi_set_drvdata(dsi, ctx);
> +
> + drm_panel_init(&ctx->panel, dev, &rm69380_panel_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> + ctx->panel.prepare_prev_first = true;
> +
> + ctx->panel.backlight = rm69380_create_backlight(dsi);
> + if (IS_ERR(ctx->panel.backlight))
> + return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
> + "Failed to create backlight\n");
> +
> + drm_panel_add(&ctx->panel);
> +
> + for (i = 0; i < ARRAY_SIZE(ctx->dsi); i++) {
> + if (!ctx->dsi[i])
> + continue;
> +
> + dev_dbg(&ctx->dsi[i]->dev, "Binding DSI %d\n", i);
> +
> + ctx->dsi[i]->lanes = 4;
> + ctx->dsi[i]->format = MIPI_DSI_FMT_RGB888;
> + ctx->dsi[i]->mode_flags = MIPI_DSI_MODE_VIDEO_BURST |
> + MIPI_DSI_CLOCK_NON_CONTINUOUS;
> +
> + ret = devm_mipi_dsi_attach(dev, ctx->dsi[i]);
> + if (ret < 0) {
> + drm_panel_remove(&ctx->panel);
> + return dev_err_probe(dev, ret,
> + "Failed to attach to DSI%d\n", i);
> + }
> + }
> +
> + return 0;
> +}
> +
> +static void rm69380_remove(struct mipi_dsi_device *dsi)
> +{
> + struct rm69380_panel *ctx = mipi_dsi_get_drvdata(dsi);
> +
> + drm_panel_remove(&ctx->panel);
> +}
> +
> +static const struct of_device_id rm69380_of_match[] = {
> + { .compatible = "lenovo,j716f-edo-rm69380" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, rm69380_of_match);
> +
> +static struct mipi_dsi_driver rm69380_panel_driver = {
> + .probe = rm69380_probe,
> + .remove = rm69380_remove,
> + .driver = {
> + .name = "panel-raydium-rm69380",
> + .of_match_table = rm69380_of_match,
> + },
> +};
> +module_mipi_dsi_driver(rm69380_panel_driver);
> +
> +MODULE_AUTHOR("David Wronek <david@xxxxxxxxxxxxxx");
> +MODULE_DESCRIPTION("DRM driver for Raydium RM69380-equipped DSI panels");
> +MODULE_LICENSE("GPL");
>
> --
> 2.44.0
>
